Features
| * Programable Servo Controlled Ballscrew driven X, Y Table Travels | * Infinitely Variable Spindle Speeds 90 – 3,500 RPM |
| * Available with an Optional Horizontal Spindle | * Integral Digital Position Readouts in X & Y axis |
| * Digital Control Touch Panel and LED Spindle Speed Readout | * 12” x 51” Table Surface |
| * 7.5-Horsepower Spindle Motor and # 40 NST (NMTB) Spindle | * Power Quill Feed and Power Knee Travels |
Specifications
| Table | GMV-205F |
| Table Size (Hardened & Grounded) | 11.8″ x 51.18″ (300 x 1,300mm) |
| T-slot Width (3 Hardened T-Slots on 2.5″ centers) | 5/8″ (15.875mm wide) |
| Table Height – Surface to floor measurement | 36.8″ – 54.9″ (435 – 1,395mm) |
| Table Load Maximum | 440 lbs. (200 kg) |
| Machine Travels & Capacity | |
| Table Travel – X Axis | 32″ (815mm) |
| Cross Travel – Y Axis | 15″ (380mm) |
| Knee Travel – Z Axis | 18″ (460mm) |
| Ram Travel (Overarm) / Swivel | 18.5″ (470mm) |
| Spindle Nose-to-Table Surface Travel | 1.5″ – 19.6″ (40 – 500mm) |
| Spindle Nose-to-Column Travel | 14″ – 32.5″ (355 – 825 mm) |
| Quill Travel – Manual & Power Feed | 5″ (127mm) |
| Quill Feeds – With Trip Release – Inch | 0.00015″ / 0.0003″ / 0.0006″ |
| Quill Feeds – With Trip Release – Metric | 0.004mm / 0.008mm / 0.016mm |
| Scale Ring resolution in inches | 40.001″ (5 mm) with adjustable zero position |
| Ways – Hardened & Ground | Square Box Ways in Y & Z Axes |
| Spindle Head | |
| Head Tilt (Left-to-Right) | 90° – 0 – 90° |
| Head Swivel | 360° |
| Spindle Motor | 5 HP / 3 Phase / 220 Vac (440 Vac. optional) |
| Spindle Taper | #40 NST (NMTB) |
| Spindle Runout | 0.0002″ maximum runout (0.005mm) |
| Spindle Bearings | ABEC-7 matched set of Class-7 bearings |
| Quill Diameter | 3 – 3/8″ (85.725 mm) |
| Variable Speed Spindle Drive | 90 – 3,500 RPM |
| NOTE: 5,000 RPM Electronic Variable-Speed Spindle available with optional AC Inverter Spindle Head |
| Dimensions & Weight | |
| Power Requirements 3-Phase Power | 220 vac, 7-kVA (440 vac optional) |
| Machine Weight | 3,960 lbs. (1800 kg) |
| Machine Dimensions D x W x H | 68″ x 85″ x 99″ |
| Shipping Dimensions D x W x H | 72″ x 58″ x 88″ |
 |
 |