Features
| * 3-Horsepower Variable Speed Head | * 9” x 50” Table Dimensions |
| * Class-7 Super Precision Spindle Bearings | * Hard-Chrome Plated X & Y Axis Ways |
| * Hard-Chrome Plated and Mirror Ground Quill | * Coolant Proof Halogen Lamp Standard |
Specifications
| Table | GMV-1F CNC |
| Table Size (W x L) | 9″ x 50″ |
| T-slot Width (3 Ground T-Slots) | 5/8″ with ground reference edges (15.9mm wide) |
| Table Load Capacity (Evenly Distributed | 900 lbs. |
| Machine Travels & Capacity | |
| Travels may be reduced by limit switches, ballscrew bumpers, CNC, etc. | |
| Table Travel – X Axis (under CNC control) | 31.5″ |
| Cross Travel – Y Axis | 11.4″ |
| Knee Travel –Z Axis | 16″ (406mm) |
| Ram Travel | 17.7″ (450mm) |
| Spindle Nose-to-Table Surface Travel | 2″ – 18″ (50 – 457mm) |
| Quill Travel – Z Axis in 3-Axis Version | 5″ (127mm) (manual & Powerfeed travel w/o 3rd) |
| Quill Feeds – With Trip Release – Inch | 0.0015″ / 0.003″ / 0.006″ |
| Quill Feeds – With Trip Release – Metric | 0.04mm / 0.08mm / 0.16mm |
| Quill Diameter | 3 –3/8″ (85.725mm) |
| Ballscrews (X & Y) | 0.200″ per rev |
| Adjustable scale ring display resolution | 0.001″ (5mm) |
| Spindle Head | |
| Head Tilt (Left-to-Right) | 90° – 0 – 90° |
| Head Tilt (Front-to-Back / Up-Down) | 45° – 0 – 38° |
| Head Swivel | 360° |
| Spindle Motor | 3 HP / 3 Phase / 208 –240 vac |
| Spindle Taper | R-8 (ISO 30-taper optional) |
| Spindle Runout | 0.0002″ maximum runout (0.005mm) |
| Spindle Bearings | Fafnir ABEC-7 matched set of Class-7 bearings |
| Variable Speed Drive – Dual Range | 60 –500 rpm (low-range) / 500 – 4500 rpm (high-range) |
| NOTE: 6,000 RPM Spindle available with optional AC Inverter Spindle Head |
| Dimensions & Weight | |
| Power Requirements | 220 vac ±5% / 3-Phase |
| Machine Weight | 2407 lbs. (1200 Kgs) |
 |
 |