Features
| * Full Manual & CNC Capability | * 10″ x 54″ Table Dimensions |
| * Ideal for R&D Toolroom shops | * Rugged Meehanite castings with high density cast iron |
| * Easy to use CNC Control | * Hardened & Ground Table ways |
| * Precision Ball Screws | * Class 7 Spindle Bearings |
| * 3rd Axis DRO included with 2 Axis CNC Mills |
Specifications
| Table | GMV-1F CNC |
| Table Size (W x L) | 10″ x 54″ |
| T-slot Width (3 T-Slots) | 5/8″ T-Slots with ground reference edges (15.9mm wide) |
| Table Load Capacity (Evenly Distributed) | 950 lbs. (430kg) |
| Machine Travels & Capacity | |
| Travels may be reduced by CNC limit switches. | |
| Table Travel – X Axis (under CNC control) | 34.5″ (875mm) |
| Cross Travel – Saddle / Y Axis | 16.3″ (415mm) |
| Knee Travel –Z Axis | 15.75″ (400mm) |
| Spindle Nose-to-Table Surface Travel | 2″ – 18″ (50 – 457mm) |
| Quill Travel – CNC Z Axis | 5″ (127mm) (manual & Powerfeed travel w/o 3rd) |
| Quill Feeds – With Trip Release – Inch | 0.0015″ / 0.003″ / 0.006″ |
| Quill Feeds – With Trip Release – Metric | 0.04mm / 0.08mm / 0.16mm |
| Quill Diameter | 3 –3/8″ (85.725mm) |
| Ballscrew ground pitch (X & Y) | 0.2″ per rev. |
| Adjustable scale ring display resolution | 0.001″ (5mm) |
| Ways – Hardened & Ground | Dovetail Ways in X-Axis |
| Spindle Head | |
| Spindle Motor | 3 HP |
| Spindle Taper | R-8 #30 taper & #40 taper optional) |
| Spindle Runout | 0.0002″ maximum runout (0.005mm) |
| Spindle Bearings | ABEC-7 matched set Class-7 bearings |
| Head Tilt (Left-to-Right) | 90° – 0 – 90° |
| Head Tilt (Front-to-Back / Up-Down) | 45° – 0 – 45° |
| 360° |
| Dimensions & Weight | |
| Power Requirements 3 Phase | 220 vac 21amps |
| Machine Dimensions L x W x H | 65″ x 66″ x 87″ |
| Machine Weight | 3482 lbs. (1580 Kgs) |
 |
 |