Features
| * Class-7 Super Precision Spindle Bearings | * 10″ x 54″ Table Dimensions |
| * 3 Horsepower Variable Speed Spindle | * Hard-Chrome Plated, Ground & Lapped Quill |
| * Square Box Slideways on Y & Z Axes | * R-8 Taper Spindle |
| * Coolant Proof Halogen Lamp Standard | * 4,000 RPM Digital Variable Speed Option Available |
Specifications
| Table | GMV-3F |
| Table Size (W x L) | 10” x 54” (254 x 1372mm) |
| T-slot Width / Quantity | 5/8” (15.9mm wide) 3 on 2.5” centers |
| Table Load Capacity | 440 lbs. (200 kg) |
| Table Load Capacity (Evenly Distributed) | 950 lbs. (430 kg) |
| Table Height – Surface to Floor Dimensions | 37.4” – 52.8” (950 – 1340mm) |
| Machine Travels & Capacity | |
| Table Travel – X Axis (Optional Power Feed) | 35” / 30.3” (889mm) / (770mm) |
| Vertical Knee Travel – Z Axis | 17.5” (444.5mm) |
| Cross Travel – Y Axis | 15.05” (383.27mm) |
| Ram Travel (Overarm) / Swivel | 18.5” (470mm) / 360° |
| Spindle Nose-to-Table Surface Travel | 5.3” – 20.7” (135 – 525mm) |
| Z² – Quill Travel – Manual & Power Feed | 5” (127mm) |
| Quill Feeds – With Trip Release – Inch | 0.0015″ / 0.003″ / 0.006″ |
| Quill Feeds – With Trip Release – Metric | 0.04mm / 0.08mm / 0.16mm |
| Quill Diameter | 3 – 3/8″ (85.725mm) |
| Leadscrew ground pitch (X & Y) | 0.2″ per rev. (ballscrews optional) |
| Scale ring resolution in inches | 0.001″ (5mm) (with adjustable zero position) |
| Ways – Hardened & Ground | Dovetail Ways in X axis / Square Box Ways in Y & Z axes |
| Spindle Head-Twin Swivel (Forward-Back & Left right) | |
| Spindle Motor | 3-HP / 3-Phase 220 volts (440 Optional) |
| Spindle Taper (hardened & ground) | R-8 |
| Spindle Runout | 0.0002” maximum runout (0.005 mm) |
| Spindle Bearings ABEC-7 matched set | ABEC-7 matched set Class-7 bearing |
| Variable Speed Drive – Dual Range | 660 – 500 rpm (low-range) / 500 – 4500 rpm (high-range |
| Head Tilt (Left-to-Right) | 90° – 0 – 90° |
| Head Tilt (Front-to-Back / Up-Down) | +45° – 0 – -38° |
| Head Swivel on Turret | 360° |
| Dimensions & Weight | |
| Power Requirements 3-Phase Power | 220vac/15 amps (440vac optional) |
| Machine Weight | 2,750 lbs. (1250Kgs) |
| Machine Dimensions L x W x H | 65″ x 66″ x 87″ |
 |
 |