Features
| * 4.09” Bar Capacity | * Meehanite casting help minimize vibration for superior finish and tool life |
| * 24” Swing Diameter over Bedways | * Hardened & Precision ground double-Vee / Double-Flat bedways for high rigidity |
| * 60” Between Centers | * Automatic Metered lubrication system for ball screws and way |
| * Compact Footprints make it ideal for R&D and Toolroom shops | * Inch/metric threading, Left or right-hand threading |
| * Easy to use Fanuc or Fagor CNC Control | * Built in high-capacity coolant system |
Specifications
| Capacity & Dimensions | GTW-2460 CNC |
| Swing over Bed | 24″ (610mm) |
| Swing over Cross Slide | 14.5″ (370mm) |
| Center Height | 12″ (305mm) |
| Center Distance | 59.05″ (1500mm) |
| Bed Length | 102.36″ (2600mm) |
| Bed Way Width | 15.75″ (400mm) |
| Bed Casting Height | 13 3/8″ (340mm) |
| Spindle | |
| Spindle Motor Horsepower | 20 HP Peak (15 HP 30min duty) (11Kw – 15Kw) |
| Spindle Speeds – Programmable | 30 – 1600 RPM infinitely variable, in 2 gear ranges |
| Spindle Speed 2 Gear Ranges – Programmable | M41=30 – 600 M42 = 80 – 1600 RPM |
| Spindle Speed | H = 80 – 1600 RPM L= 30 – 600 RPM |
| Spindle Bore | ø4.09″ (104mm) (90mm with hydraulic chuck) |
| Spindle Nose – Camlock | D1-8 Camlock 75mm Draw tube |
| Spindle Bearings – 2 bearing spindle | Tapered Roller Bearings front, roller bearing rear |
| Spindle ID Taper in Spindle Nose | MT-8 MT#8 Taper |
| Cross Slide X Axis | |
| Rapid Traverse Feedrate | 197 IPM (5m/min) |
| X-Axis motor | FANUC- Beta IS4 0.75 kw (4,000 rpm) |
| Cross Slide Travel | 12.63″ (320mm) |
| Cross Slide Dimensions – width x length | 9.05″ x 29.9″ (230 x 760mm) |
| Cross Slide Ballscrew diameter | .984″ (25mm) |
| Cross Slide Ballscrew Pitch | 5mm Accuracy Grade C3 (H-P Laser Tested) |
| Cross Slide Thrust | 1190 lbs. (540 Kg Force) |
| Carriage Z Axis | |
| Rapid Traverse Feedrate | 197 IPM (5m/min) |
| Z-Axis Motor Power | Fanuc – Beta IS4 0.75kw (4000rpm) |
| Z-Axis Travel | 59.05″ (1500mm) |
| Cutting Tool Height Maximum | 1″ (25mm) |
| Carriage ballscrew diameter | 1.26″ (32mm) |
| Carriage ballscrew pitch | 5mm Accuracy Grade C3 (H-P Laser Tested) |
| Carriage Slide Thrust | 1190 lbs. (540 Kg Force) |
| Tailstock | |
| Quill Diameter | 2.95″ (75mm) |
| Quill Stroke- w/ selectable 2 speed Quill Advance | 6.30″ (160mm) |
| Quill Taper | MT-5 |
| Quill Tang Drive and drift-slot for tailstock | included |
| Tailstock body set-over adjustment | ±0.4″ (±1mm) |
| Specifications | |
| Coolant Pump Motor | 1/8 HP / 13.2 gal. |
| Coolant Tank Capacity | 10.5 gal. (40 liters) |
| Electrical Requirements | 220 vac ±5% 60 Hz / 75 amp service |
| Machine Weight | 8820 lbs. (4000 kgs) |
| Shipping Weight | 9260 lbs. (4200 kgs) |
| Machine Dimensions (L x W x H) | 129″ x 75″ x 80″ (3260 x 1900 x 2030mm) |
| Shipping Dimensions (L x W x H) | 133″ x 79″ x 86″ |
 |
 |