Features
| 30 Tool High Speed Double Arm ATC | 1,417 Inch per Minute Rapid Rates |
| 12,000 RPM Double-Ground “Big-Plus” Spindle | 300-PSI Through-the-Tool Coolant System |
| Spindle Chiller for Consistent Thermal Stability | 2,700 Block Look-Ahead High-Speed Machining |
| 4th & 5th Axis Wiring | Y-Axis Supported with 4-Ways |
Specifications
| Axis Travel | GEN MILL 5127 |
| X-Travel | 51.27″ 1,300mm |
| Y-Travel (4-Linear cross ways) | 27.56″ 700mm |
| Z-Travel | 25.59″ 650mm |
| Spindle Nose to Table Surface | 5.9″ – 31.5″ 150 – 800mm |
| Spindle Center to Z-axis way covers | 28.96″ 735mm (throat dimensions) |
| Table | |
| Table Size L x W | 57.98 x 27.56″ 1,450mm x 700mm |
| T-slot width (5 T-slots total) | 0.709″ slot width 18 mm wide on 100mm centers |
| Max. Table Load | 4,850 lbs. 2200 kgs load |
| Spindle | |
| Spindle Motor – S1/S2/S3 = 15/18.5/26kw | 35 HPS3 Power, 25-HP 30-minute duty-rating |
| Spindle Speed – Inline Direct-Drive | 12,000 rpm |
| Spindle Torque | 90 ft-lb @ 1,500 rpm |
| Tool Type | CAT #40 Taper, BT #40 optional |
| Spindle Taper Material / Hardness | HRC 58-62 SCM415 |
| Spindle Orientation | By Sensor |
| Spindle Runout | ≤0.000040″ T.I.R. |
| Spindle Bearings – Front | 110mm NSK 70BNR, 10 x 2 P4 class-7 bearings |
| Spindle Bearings – Rear | 110mm NSK 70BNR, 10 x 2 P4 class-7 bearings |
| Retention System / Holding Capability | Bellville Spring Stack 1650-1760 lbs. |
| Retention Knob (pull stud) | C40 – 4502H (coolant), Japanese Standard |
| Axis Feeds | |
| Accuracy X, Y, & Z axis (JIS6338) | ± 0.0002” / 12” ± 0.005mm over 300mm travel |
| Repeatability X, Y, & Z axis (JIS6338) | ± 0.0001” / 12” ± 0.003mm over 300mm travel |
| Least Input Command Increment | 0.0001” / 0.000040” 0.001mm / (40-millionths in metric) |
| Rapid Traverse X and Y / Motor HP | 984 ipm / 6-HP, 25m / minute / 4.5kw |
| Rapid Traverse Z / Motor HP | 984 ipm / 6-HP, 25m / minute / 4.5kw |
| Ballscrews – X, Y, Z | X, Y=50mm ballscrews 10mm pitch, (Z=40mm) |
| Cutting Feedrate | 0.04 – 393 ipm |
| Tool Changer | |
| Tool Capacity (30+1) | 30-Tool Twin-Arm |
| Tool Shank | CAT#40 Taper |
| Tool Change Time (average) | 3.7-sec. tool-to-tool |
| Maximum Tool Diameter / with adjacent tool | 5.90″ / 3.15″ 150mm / 80mm |
| Maximum Tool Length | 11.81″ – 300mm |
| Maximum Tool Weight | 15 lbs. 7kg |
| Tool Selection / Tool Access | Random Access Bi-Directional |
| Specifications | |
| Air Service Requirements | 85 psi @ 14-scfm |
| Coolant Capacity / Pressure | 134 gallons / 300 PSI 510 liters |
| Connected Load Electrical Capacity | 75 Amps / 220vac ±5%, 60-Hz |
| Floor space requirements (L x W x H) | 146″ x 130″ x 119″ 370x330x260cm (+ 48″ for conveyor) |
| Shipping dimensions (L x W x H) | 126″ x 92″ x 101″, 318x231x256cm |
| Machine Weight | 19,841 pounds 9,000 kg |
| Warranty – 1-year machine warranty | 3-year Mitsubishi control, motors, & drive warranty |
 |
 |