Features
| 40 Tool High Speed Double Arm ATC | Spindle Chiller for Consistent Thermal Stability |
| 12,000 RPM Double-Ground “Big-Plus” Spindle | 300-PSI Through-the-Tool Coolant System |
| 2,700 Block Look-Ahead High-Speed Machining | Y-Axis Supported with 4-Ways |
| 4th & 5th Axis Wiring |
Specifications
| Axis Travel | GEN MILL 7039 |
| X-Travel | 70.86″ 1,800mm |
| Y-Travel | 39.37″ 1000mm |
| Z-Travel | 35.43″ 900mm |
| Spindle Nose to Table Surface | 9.8″ – 45.27″ 250 – 1150mm |
| Spindle Center to Z-axis way covers | 41.53″ 1050mm (throat dimensions) |
| Table | |
| Table Size L x W | 76.77″ x 35.43″ 1,950mm x 900mm |
| T-slot width (5 T-slots) | 22mm slot width on 160mm centers |
| Max. Table Load | 6,600 lbs. 3000 kgs load for full accuracy |
| Spindle | |
| Spindle Motor – S1/S2 = 22/26kw | 50-Horsepower Peak, 35-HP 30-minute duty-rating |
| Spindle Speed | 12,000 rpm (15,000 rpm optional) |
| Tool Type | CAT #40 Taper (CAT/BT #40 & #50 taper optional) |
| Spindle Taper Material / Hardness | SCM415 / HRC58-62 |
| Retention System / Holding Capability | Bellville Spring Stack, 1650 – 1760 lbs. |
| Spindle Runout | ≤0.000040 T.I.R. |
| Spindle Bearings – Front | 110mm NSK 70BNR 10 x 2, P4 class 7 bearings |
| Spindle Bearings – Rear | 110mm NSK 70BNR 10 x 2, P4 class-7 bearings |
| Retention Knob (pull stud) | C40-4502H (coolant) Japanese Standard |
| Axis Feeds | |
| Accuracy X, Y, & Z axis (JIS6338) | ± 0.0002” / 12” ± 0.005mm over 300mm travel |
| Repeatability X, Y, & Z axis (JIS6338) | ± 0.0001” / 12” ± 0.003mm over 300mm travel |
| Least Input Command Increment | 0.0001” / 0.000040” 0.001mm / (40-millionths in metric) |
| Rapid Traverse Z and Y | 590 ipm 15m/minute |
| Rapid Traverse Z | 472 ipm 12m/minute |
| Ballscrews – X, Y, Z | 63mm ballscrews 10mm pitch |
| Cutting Feedrate | 0.02 – 393 ipm 10m/minute |
| Axis Drive Motor Power – Z, Y | 9.4-HP 7kw |
| Axis Drive Power – Z | 9.4-HP 7kw w/brake |
| Tool Changer | |
| Tool Capacity (40+1) | 40-Tool Twin-Arm |
| Tool Shank | CAT#40 Taper (CAT#50, BT #40/#50 optional) |
| Tool Change Time (average) | 4.3-sec. tool-to-tool |
| Maximum Tool Diameter / with adjacent tool | 5.90″ / 3.15″ 150mm / 80mm |
| Maximum Tool Length | 11.81″ – 300mm |
| Maximum Tool Weight | 15 lbs. 7kg |
| Tool Selection / Tool Access | Random Access Bi-Directional |
| Specifications | |
| Air Service Requirements | 85 psi @ 14-scfm |
| Coolant Capacity | 172 gallons / 650 liters |
| Connected Load Electrical Capacity | 100 Amps / 220vac ±5%, 60-Hz |
| Floor space requirements (L x W x H) | 193″ x 131″ x 142″ 490x332x360cm (+ 47″ for conveyor) |
| Shipping dimensions (L x W x H) | 217″ x 146″ x 150″, 550x370x380cm |
| Machine Weight | 44,092 pounds 20,000 kg |
| Warranty – 1-year machine warranty | 3-year Mitsubishi control, motors, & drive warranty |
 |
 |