Features
| * 6,000 RPM Built In Main and Sub Spindle | * 10 Station BMT 55 Live Tool Turret |
| * 1-5/8” (42 mm) Bar Capacity (2” Optional) | * Full “Y” Axis for Milling off Centerline |
| * Marposs Tool Probe for Ease of Setup | * 6” Kitagawa Chuck for Main Spindle |
| * 5” Kitagawa Chuck for Sub Spindle | * Parts Catcher with Conveyor Included |
Specifications
| Main Spindle – 42 mm | GEN TURN C42 MYS |
| Maximum RPM | 6,000 RPM Built-in integral spindle motor |
| Spindle Motor | 10-HP (7.5 Kw 30-minute duty rated) |
| Spindle Nose Mount | A2 – 5 |
| Maximum Barstock Diameter | 1 5/8” (42 mm, 1.654”) |
| Spindle Through Hole Diameter | 1.98” (50.5 mm, 1.988”) |
| Maximum Chucking Diameter | 6″ |
| Maximum Swing Diameter | 9.84” (250 mm) |
| Spindle Center Height | 41” (1035 mm) |
| Sub-Spindle | |
| Maximum RPM | 6,000 RPM Belt-Driven |
| Spindle Motor | 10-HP (7.5 Kw 30-minute duty rated) |
| Spindle Nose Mount | A2 – 4 |
| Maximum Chucking Diameter | 5″ |
| Maximum Travel Distance | 11.4” (290 mm B-Axis |
| Axis Specifications | |
| X-Axis Travel | 4.33” (110 mm) |
| Z-Axis Travel | 10.633” (270 mm) |
| X, Z & B Rapid Traverse Rates | 787 IPM (20 m / min) |
| Y-Axis Travel | 2.362” (60 mm, ± 30 mm = 1.181”) |
| Y-Axis Rapid Traverse Rate | 31.5 IPM (8 m / min) |
| X-Axis Servo Motor Power | .67-HP (.5 Kw) |
| Y & B Axis Servo Motor Power | 1.0-HP (.75 Kw) |
| Z-Axis Servo Motor Power | 1.6-HP, 2.4-HP (1.2 Kw, 1.8 Kw with 52 mm bore) |
| Tool Turret | |
| Number of Tool Stations | 10-Driven Tool Stations e.g. WTO Quick-Flex toolholders |
| Driven Tool Speed | 6,000 RPM (higher with speeder tools) |
| Driven Tool Servo Motor | 1.34-HP (1.0 Kw) |
| Indexing Drive | Hydraulic Motor |
| Indexing Time | 0.8-Seconds |
| Coolant Pressure (both turrets | 135 PSI |
| Machine Dimensions | |
| Machine Dimensions (W x H x D) | 85” x 81” x 60” (w/ rear discharge chip conveyor) |
| Machine Weight | 4,410 lbs (2,000 kg) |
| Coolant Capacity | 29 gallons (110 liters) |
| Voltage Requirements | 200 vac ±10% (19 Kva 3-PH) |
| Air Pressure Requirements | 0.4 – 0.5 MPs @ 150 L / min. |
 |
 |