Kingston HSX 59 / 65 / 71 Extra Large Swing Lathes
Kingston’s HSX model raises the bar with swings up to 71” (59” over cross slide and a colossal 91” in the gap) and lengths to 12 meters (472” C.C.). The HSX comes standard with a 6” spindle bore but is available with larger thru-holes up 16”. This beast can load 22,000 lbs. between centers and 26,000 lbs .with one steady rest. It’s 40HP 4P main motor, 33” bed width, and impressive range of available feeds and threads (down to ¼” TPI) mean the HSX is a monster that can tackle virtually anything.
Specifications
| Capacity |
HSX-59 |
HSX-65 |
HSX-71 |
| Swing Over Bed |
59″ |
65″ |
71″ |
| Swing Over Cross Slide |
47″ |
53″ |
59″ |
| Swing in Gap |
80″ |
86″ |
92″ |
| Width of Bed |
33″ |
33″ |
33″ |
| Distance Between Centers |
80” – 472” |
80” – 472” |
80” – 472” |
| Headstock |
HSX-59 |
HSX-65 |
HSX-71 |
| Spindle Bore |
6” – 16” |
6” – 16” |
6” – 16” |
| Type of Spindle Nose |
A2-15 – A2-20 |
A2-15 – A2-20 |
A2-15 – A2-20 |
| Number of Spindle Speeds |
12 |
12 |
12 |
| Spindle Speed |
4 – 400 RPM (6”, 12”, 14”, 16”)
5 – 500 RPM (9”, 10”) |
4 – 400 RPM (6”, 12”, 14”, 16”)
5 – 500 RPM (9”, 10”) |
4 – 400 RPM (6”, 12”, 14”, 16”)
5 – 500 RPM (9”, 10”) |
| Gear Box |
HSX-59 |
HSX-65 |
HSX-71 |
| Number of Feed Changes |
60 Kinds |
60 Kinds |
60 Kinds |
| Longitudinal Cross |
0.003” – 0.198in/rev (0.0017-0.099in/rev) |
0.003” – 0.198in/rev (0.0017-0.099in/rev) |
0.003” – 0.198in/rev (0.0017-0.099in/rev) |
| Leadscrew Diam. & Threads per Inch |
2 1/4” & 2 TPI |
2 1/4” & 2 TPI |
2 1/4” & 2 TPI |
| Threading range – Whitworth |
½ – 30 TPI (60 kinds) |
½ – 30 TPI (60 kinds) |
½ – 30 TPI (60 kinds) |
| Threading range – Metric |
1 to 60mm pitch (52 kinds) |
1 to 60mm pitch (52 kinds) |
1 to 60mm pitch (52 kinds) |
| Threading range – Module |
0.25 – 15 (43 kinds) |
0.25 – 15 (43 kinds) |
0.25 – 15 (43 kinds) |
| Threading range – D.P. |
2 – 120 D.P. (60 kinds) |
2 – 120 D.P. (60 kinds) |
2 – 120 D.P. (60 kinds) |
| Tool Slide |
HSX-59 |
HSX-65 |
HSX-71 |
| Maximum Travel of Compound |
16.5” |
16.5” |
16.5″ |
| Maximum Travel of Cross Slide |
38” |
38” |
38” |
| Tailstock |
HSX-59 |
HSX-65 |
HSX-71 |
| Tailstock Quill Travel |
11.8” |
11.8” |
11.8” |
| Tailstock Quill Diameter |
7.08” |
7.08” |
7.08” |
| Tailstock Center |
M.T. #6 (Opt. M.T. #7) |
M.T. #6 (Opt. M.T. #7) |
M.T. #6 (Opt. M.T. #7) |
| Motor |
HSX-59 |
HSX-65 |
HSX-71 |
| Main Drive Motor |
40 HP*4P |
40 HP*4P |
40 HP*4P |
| Coolant Pump Motor |
1/4 HP |
1/4 HP |
1/4 HP |
| Dimensions |
HSX-59 |
HSX-65 |
HSX-71 |
| Floor Space 89”W X 92”H |
161” – 555” |
161” – 555” |
161” – 555” |
| Weight (lbs.) |
24,691 – 57,761 lbs. |
24,691 – 57,761 lbs. |
24,691 – 57,761 lbs. |
| Standard Features |
Optional Accessories |
| 40 HP, 4P Main Motor |
11.8” Steady Rest with Roller Jaws (Min. Capacity 2.78”) |
| 6” Spindle Bore (Opt. 9 – 16”) |
31.5” Steady Rest with Roller Jaws |
| Spindle Nose: ASA-A2-15 (Opt. A2-20) |
Follow Rest (Pad Jaw) |
| Rear Chuck Adapter |
Roller Bracket (Two point) |
| 4-Jaw 50” Face Plate |
Halogen Work Light |
| 23.6” Steady Rest with Roller Jaw (Min. Capacity 11”) |
70.8” Face Plate and Boring Mill Jaws (4 pcs independent) |
| Set of Change Gears for Special Leads |
Motorized Tailstock Body |
| Hardened and Ground Bedway’s |
55” Chuck Guard |
| Tool Slide with T-Slot |
Traveling Chip Guard (Follows the carriage) |
| Thread Chasing Dial |
Tool post Small Splash guard. |
| 4-Way Rapid Traverse |
Longitudinal Feed Stop |
| Hydraulic Brake System |
Digital Readout (DRO) |
| Full Length Splashguard |
Aloris Tool Post & Sets |
| Self-Spacing Supports for Lead Screw, Feed Rod & Control Rod |
3-Jaw and 4-Jaw Manual Chucks |
| Coolant System with Pump and Piping |
|
| Tailstock Safety Locking Chock |
|
| 2-Speed Drive Tailstock Quill |
|
| Pull Drawer Chip (Coolant) Pan |
|
| Tool Box with Necessary Wrenches & Spanners |
|
| UL Electrical parts |
|
| Instruction Manual and Parts List |
|
 |
 |
