Standard Equipment (All of the following comes with the machine)
| Setting for ram speed slowdown and rapid return position | Massive Torsion Bar for Parallelism | |
| Forged Heavy Duty Cylinder and Cylinder Body | Three Speed Ram | |
| Rapid Approach, Bending Cycle and Rapid Retreat | Bottom Time Delay | |
| All Steel Construction | Inching, Single Cycle and Auto Run | |
| Ram takes special, heavy duty safety tang | Bed Slots and die clamps | |
| Free Gooseneck Punch and multi-opening Die for up to 90º forming up to 10-gauge mild steel (see special note) |
Specifications
| * Working Pressure | 390 Tons | * Length of Working Table | 157.4″ | |
| * Distance Between Housings | 120.8″ | * Throat Depth | 15.7″ | |
| * Stroke Adjustment of Ram | 3.93″ | * Ram Travel | 9.84″ | |
| * Open Height | 24.8″ | * Bed Height | 40″ | |
| * Back gauge Travel | 24″ | * Motor | 30 HP | |
| * Voltage | 220 or 440, 3 Phase, 100/50 amp | * Net Weight | 51,808 lbs. | |
| * Length x Width x Height | 180″ x 87″ x 130″ |
Specifications are subject to change without notice.
Special Note The Gooseneck Punch and multi-opening Die included are general purpose tools to be used for training only. Precision tooling should be purchased to meet your specific needs. The punch is segmented and it is up to the customer to calibrate these if they want to use them for a particular purpose.
* There is no warranty on these items.
| Press Brake CNC operators panel with LCD touch screen and graphics function. |
 |
Available Options
| CNC 2-Axis Color Graphic Control: Controls BOTH Bend Angle and Backgauge Position. Comes with 6″ LCD touch screen. Code and Graphic programming included. Graphic allows 10 bends per program/cross-section. Controls features a tool library, Metric/inch switchable, Auto bend sequence, Auto retract of Backgauge, Spread length, Interference bend alert, Calculated bend allowance, Programmable ram dwell and much more. Control stores thousands of programs with USB Port, Ethernet and RS232 for program backup. | ||
| Sick Model deTec 4 Light Curtain System – Minimum OSHA Requirement | ||
| Upgrade to Fiessler Akas II Laser Guarding (Substitute for Sick deTec 4) | ||
| Add Third Axis (Back Gauge Height Controlled from operator panel) | ||
| CNC Controlled Mechanical Auto Crown | ||
| Training at Memphis, TN Facility | ||
| Training at customer site, less than 300 miles from Memphis, TN | ||
| Training at customer site, more than 300 miles from Memphis, TN | ||
| (If outside continental USA, please call for quote) | ||
| All pricing is subject change without notice. |
 |
 |