| Punching (88 Tons) | 1-1/16” diameter through 1” plate |
| Throat Depth | 13.9” |
| Bending | 12” w/4-way die block |
| Round Bar Shear | Up to 2″ |
| Square Bar Shear | Up to 2″ |
| Flat Bar Shear | 18-1/2″ x 3/8″, 13″ x 3/4″ |
| Angle Shear | 5-1/2″ x 5-1/2″ x 7/16″ |
| Coping/Notching | 2-1/4″ x 3-7/8″ x 1/2″ |
| Motor x 2 | 7.5 HP x 2 |
| Weight | 5,950 lbs. |
MAXIMUM SPECIFICATIONS (rated on mild steel – 60,000 PSI Tensile)
STANDARD FEATURES
| 1. Automatic Hydraulic Hold Downs for Plate and Angle Section– Allows the operator to clamp the material fully during the shearing operation without manual adjustments. |
| 2. Magnetic Work Light– LED Work Light that can be moved for illumination around the punch and shear stations. |
| 3. True Dual Hydraulic System– Dual Hydraulic System with (2) Motors, Pumps and Valving Systems allows for either end of the unit to be run at the same time or independent of each other. This also allows for only one system to be on which saves money on electricity. |
| 4. Bending Attachment– Mounts on the Punch End of the machine and allows for bending small brackets. |
| 5. Productivity Package– Punch Gauging Table, Electronic Back Gauge and Coper Table with Guides. |
STANDARD EQUIPMENT
| Automatic Hydraulic Hold Down for Flat/Angle | Coupling Wrench |
| Punch Holder, Stripper, & Die Block | Allen Wrench Pack |
| 5 Punch & Die Sets 9/16” through 1-1/16” | Set of Chip Buckets |
| Set of Angle Knives | Grease Gun |
| Set Round/Square Bar Knives | Dual Foot Switches |
| Set of 18-1/2” Plate Shear Knives | Instruction/Parts Book |
| Set of Coper Knives | Bending Attachment |
 |
 |