| Punching (140 Tons) | 1-3/4” diameter through 1” plate |
| Throat Depth | 12” |
| Bending (Optional) | 12” up to 24” w/4-way die block |
| Round Bar Shear | 1/2” through 2” |
| Square Bar Shear | 1/2” through 1-3/8” |
| Flat Bar Shear | 20” x 1/2”, 18” x 3/4”, 14″ x 1″ |
| Angle Shear | 6” x 6” x 5/8” |
| Coping/Notching | 4” x 6” x 3/8” |
| Motor | 15 HP |
| Weight | 6,200 Lbs. |
With 140 tons of punching force, the Piranha Model P-140 is truly the king of ironworker machines.
Standard Features
- Urethane Stripper Attachment- keeps material flat through the punching process, eliminating.
distortion. The shorter required stroke gives you a faster punching cycle. - Automatic Urethane Hold-downs- clamps and releases material automatically with each stroke. Part movement is eliminated by clamping the part throughout the entire shearing cycle.
- 3. Visibility- a direct line of sight over the hold down bar allows the operator to easily and accurately line up cuts to the shear blades.
- Flat Bar Shear- the low rake angle shear design results in flatter and higher quality sheared parts. Shear blades have four useable edges giving you a longer life and less expensive blades.
- Angle Shear- the floating upper blade seats in the center of the angle prior to cutting minimizing
distortion giving you a higher quality cut. - Coper Notcher- the low rake angle keeps part flat and under control during notching.
- Quick Change Tooling– the unique Piranha dovetail design allows for quick installation and removal of all standard and optional tools.
MAXIMUM SPECIFICATIONS (rated on mild steel)
 |
 |