| Punching (88 Tons) | 1-1/16” diameter through 1” plate |
| Throat Depth | 9” |
| Bending (Optional) | 24”, 36”, 48” w/4-way die block |
| Round Bar Shear | 1/4” through 1-1/2” |
| Square Bar Shear | 1/2” through 1” |
| Flat Bar Shear | 8” x 3/4”, 12” x 5/8”, 24″ x 1/4″ |
| Angle Shear | 5” x 5” x 3/8” |
| Coping/Notching | 2-3/4” x 4” x 1/4” |
| Motor | 10 HP |
| Weight | 4,700 Lbs. |
The Piranha Model PII-88 ironworker has dual-operator controls for the punch station and shear/coper stations and an Automatic Urethane Hold Down on the Plate and Angle Shear. Both ends of the machine can be operated independently of each other at the same time. A large, open punch station allows the use of a virtually unlimited range of standard accessories and special tooling, in addition to a 24″ plate shear capacity.
Standard Features
- Mechanical Stripper Attachment- keeps material flat through the punching process, eliminating.
distortion. The shorter required stroke gives you a faster punching cycle. - Automatic Urethane Hold-downs- clamps and releases material automatically with each stroke. Part movement is eliminated by clamping the part throughout the entire shearing cycle.
- Visibility- a direct line of sight over the hold down bar allows the operator to easily and accurately line up cuts to the shear blades.
- Flat Bar Shear- the low rake angle shear design results in flatter and higher quality sheared parts. Shear blades have four usable edges giving you a longer life and less expensive blades.
- Angle Shear- the floating upper blade seats in the center of the angle prior to cutting minimizing.
- Coper Notcher- the low rake angle keeps part flat and under control during notching.
MAXIMUM SPECIFICATIONS (rated on mild steel)
 |
 |