WITH DUAL OPERATOR STATIONS, with standard 16” punch throat
Noteworthy Features of this Ironworker:
| Dual hydraulic cylinders for two-man operation with two moveable foot pedals. |
| Five workstations: punch, plate shear, angle shear, rod shear and notcher. |
| This machine also comes with a press brake attachment. |
| Punch station has large two-piece gauging table with fence. |
| Punch station has quick acting swing-away stripper with 3 inserts. |
| Punch station has removable sections for punch leg of channel or I-beam. |
| Quick change coupling nut and sleeve for punch. |
| Electric Backgauge, 3’ long. |
| Electrically interlocked safety guard for notching station. |
| Magnetic base workstation light. |
| 15 HP, 3-phase operation. |
| This machine weighs 10,560 lbs. |
| Three sets of round punch and die. |
| Spare parts and tools. |
| PUNCH STATION – F26 Punch F62 Die |
| Punching tons: 125 |
| Punching maximum – Round: 1″ thick x 1-1/2″ diameter |
| Throat depth: 16″ |
| Punch and die clearance for gauge thickness = slip fit to 1/64″ |
| Punch and die clearance for 1/4″ to 1/2″ thickness = 1/32″ |
| Punch and die clearance for 1/2″ to 3/4″ thickness = 1/16″ |
| Punch and die clearance for 3/4″ to 1″ thickness = 3/32″ |
| Punch and die clearance for 1″ and over thickness = 1/8″ |
| FLAT BAR SHEAR STATION |
| Maximum thickness: 1″ thick x 13″ width |
| Maximum length: 5/8″ thick x 23-1/2″ width |
| Blade length: 23-1/2″ |
Bar Shear gapped for 1/4″ thickness and up. Cutting gauge thickness may require shimming to reduce gap.
| ANGLE SHEAR STATION |
| Capacity at 90 degrees: 6″ x 6″ x 5/8″ |
| Capacity at 45 degrees: 3″ x 3″ x 1/4″ |
| BAR SHEAR STATION |
| Round solid bar maximum: 2-3/8″ |
| Square solid bar maximum: 2″ |
| RECTANGULAR NOTCHER STATION |
| Maximum thickness capacity: 3″ Width x 1-1/2″ Depth x 3/8″ Thick |
| Width of notcher top blade: 3″ |
| Depth of notcher: 4″ |
Notcher Station not gapped for small gauge thickness. Must centerload heavy notches.
| REQUIREMENTS |
| Horsepower: 15 |
| Electrical: 220 Volts, 3 Phase or 440 Volts, 3 Phase |
| Full load amps: 45/22.5 |
| Hydraulic oil type/capacity: Equal to Exxon/Mobil NUTO-H46 – 33 gallons |
| Weight and dimensions: 10,560 lbs. 92″ L x 37″ W x 82″ H |
All capacity based on 65Kpsi Ultimate Tensile Strength.
| Optional ROUND Punch & Die Set as described: |
| Preset sizes of 12 – F26 Round Punch, 12 – F62 Round Dies, Half Pint of Punch-Easy®, and Toolbox |
 |
 |