WITH DUAL OPERATOR STATIONS, Standard 12” punch throat
Noteworthy Features of this Ironworker:
| Dual hydraulic cylinders for two-man operation with two moveable foot pedals. |
| Five workstations: punch, plate shear, angle shear, rod shear and notcher. |
| This machine also comes with a press brake attachment. |
| Punch station has large two-piece gauging table with fence. |
| Punch station has quick acting swing-away stripper with 3 inserts. |
| Punch station has removable sections for punch leg of channel or I-beam. |
| Quick change coupling nut and sleeve for punch. |
| Electric Backgauge, 3’ long. |
| Electrically interlocked safety guard for notching station. |
| Magnetic base workstation light. |
| 7.5 HP, 3-phase operation. |
| This machine weighs 3,527 lbs. |
| Three sets of round punch and die. |
| Spare parts and tools. |
| PUNCH STATION – F26 Punch F62 Die |
| Punching tons: 66 |
| Punching maximum – Round: 3/4″ thick x 1″ diameter |
| Throat depth: 12″ |
| Punch and die clearance for gauge thickness = slip fit to 1/64″ |
| Punch and die clearance for 1/4″ to 1/2″ thickness = 1/32″ |
| Punch and die clearance for 1/2″ to 3/4″ thickness = 1/16″ |
| Punch and die clearance for 3/4″ to 1″ thickness = 3/32″ |
| Punch and die clearance for 1″ and over thickness = 1/8″ |
| FLAT BAR SHEAR STATION |
| Maximum thickness: 5/8″ thick x 10″ width |
| Maximum length *: 5/16″ thick x 16″ width (*With squaring arm removed) |
| Blade length: 16″ |
Bar Shear gapped for 1/4″ thickness and up. Cutting gauge thickness may require shimming to reduce gap.
| ANGLE SHEAR STATION |
| Capacity at 90 degrees: 5″ x 5″ x 3/8″ |
| Capacity at 45 degrees: 2″ x 2″ x 1/4″ |
| BAR SHEAR STATION |
| Round solid bar maximum: 1-3/4″ |
| Square solid bar maximum: 1-9/16″ |
| RECTANGULAR NOTCHER STATION |
| Maximum thickness capacity: 3″ Width x 1-1/2″ Depth x 5/16″ Thick |
| Width of notcher top blade: 3-3/16″ |
| Depth of notcher: 3-13/16″ |
Notcher Station not gapped for small gauge thickness. Must centerload heavy notches.
| REQUIREMENTS |
| Horsepower: 7.5 |
| Electrical: 220 Volts, 3 Phase or 440 Volts, 3 Phase |
| Full load amps: 25/12.5 |
| Hydraulic oil type/capacity: Equal to Exxon/Mobil NUTO-H46 – 19 gallons |
| Weight and dimensions: 3,527 lbs. 64″ L x 31″ W x 66″ H |
All capacity based on 65Kpsi Ultimate Tensile Strength
| Optional ROUND Punch & Die Set as described: |
| Preset sizes of 12 – F26 Round Punch, 12 – F62 Round Dies, Half Pint of Punch-Easy®, and Toolbox |
 |
 |