Features
| 30 Tool High Speed Double Arm ATC | 1,417 Inch per Minute Rapid Rates |
| 12,000 RPM Double-Ground “Big-Plus” Spindle | 300-PSI Through-the-Tool Coolant System |
| Spindle Chiller for Consistent Thermal Stability | 2,700 Block Look-Ahead High-Speed Machining |
| 4th & 5th Axis Wiring |
Specifications
| Axis Travel | GEN MILL 4024 |
| X-Travel | 40.55″ 1,030mm |
| Y-Travel | 23.62″ 600mm |
| Z-Travel | 25.59″ 650mm |
| Spindle Nose to Rotary Table Surface | 5.1″ – 30.56″ 130 – 775mm |
| Spindle Center to Z-axis way covers | 22.83″ 580mm (throat dimensions) |
| Table | |
| Table Size L x W | 45.66″ x 19.68″ 1,160mm x 500mm |
| T-slot width (3 T-slots total) | 0.709″ slot width 18 mm wide on 100mm centers |
| Max. Table Load | 3,530 lbs. 1600 kgs for full accuracy |
| Spindle | |
| Spindle Motor – S1/S2/S3 = 11/15/18.5kw | 25 Horsepower Peak, 20-HP 30-minute duty-rating spindle |
| Spindle Speed – Inline Direct-Drive | 12,000 rpm (15,000 rpm optional) |
| Spindle Torque | 90 ft-lb @ 1,500 rpm |
| Tool Type | CAT #40 Taper, BT #40 optional |
| Spindle Taper Material / Hardness | SCM415 / HRC 58-62 |
| Retention System / Holding Capability | Bellville Spring Stack 1,650 -1,760 lbs. |
| Spindle Runout | ≤0.000040″ T.I.R. |
| Spindle Bearings – Front | 110mm NSK 70BNR, 2-P4 class-7 bearings |
| Spindle Bearings – Rear | 110mm NSK 70BNR, 2-P4 class-7 bearings |
| Retention Knob (pull stud) | C40 – 4502H (coolant), Japanese Standard |
| Axis Feeds | |
| Accuracy X, Y, & Z axis (JIS6338) | ± 0.0002” / 12” ± 0.005mm over 300mm travel |
| Repeatability X, Y, & Z axis (JIS6338) | ± 0.0001” / 12” ± 0.003mm over 300mm travel |
| Least Input Command Increment | 0.0001” / 0.000040” 0.001mm / (40-millionths in metric) |
| Rapid Traverse X, Y | 1,417 ipm 36m/minute |
| Cutting Feedrate | 0.02 – 393 ipm 10m/minute |
| Axis Drive Motor Power – X, Y | 5-HP, 3.5kw |
| Axis Drive Motor Power – Z | 5-HP, 3.5kw |
| Ballscrews – X, Y, Z | 40mm ballscrews 12mm pitch |
| Tool Changer | |
| Tool Capacity (30+1) | 30-Tool Twin-Arm |
| Tool Shank | CAT#40 Taper, BT#40 optional |
| Tool Change Time | 1.7-sec. tool-to-tool |
| Maximum Tool Diameter / with adjacent tool | 5.90″ / 3.15″ 150mm / 80mm |
| Maximum Tool Length/Weight | 11.81″/15 lbs. 300mm/7kg |
| Tool Selection / Tool Access | Random Access Bi-Directional shortest path |
| Specifications | |
| Air Service Requirements | 85 psi @ 14-scfm |
| Connected Load Electrical Requirements | 50 Amp Service / 220vac ±5%, 60-Hz |
| Coolant Capacity / Pressure | 97-gallons / 300 psi 256 liters / 20-bar |
| Floor space requirements (W x D x H) | 115″ x 82″ x 116″ (add 48″ on left side for conveyor) |
| Shipping dimensions (W x D x H) | 121″ x 92″ x 121″, 306x231x256cm |
| Machine Weight | 15,708 pounds, 7,120 kg |
| Warranty – 1-year machine warranty | 3-year Mitsubishi control, motors, & drive warranty |
 |
 |