Features
| Glass Scale Feedback on All 5-Axis | 12,000 RPM Double-Ground “Big-Plus” Spindle |
| Roller Bearing Ways (twice as rigid as ball ways) | Spindle Chiller for Consistent Thermal Stability |
| 40-Tool Double Arm ATC | 300-PSI Through-the-Tool Coolant System |
| 1,417 Inch per Minute Rapid Rates | Available as 4 + 1 or 5 Axis simultaneous |
Specifications
| Axis Travel | GEN MILL 5X-12 |
| X-Travel | 34.64″ / 880mm |
| Y-Travel | 32.62″ / 600mm |
| Z-Travel | 25.59″ / 650mm |
| Spindle Nose to Rotary Table Surface | 4.72″ – 18.89″ / 120 – 480mm |
| Spindle Center to Z-axis way covers | 22.44″ / 570mm (throat dimension) |
| Rotary Table | |
| Platter Diameter | ∅ 12.6″ / ∅ 320mm |
| Center Bore Diameter | ∅ 50 H7 |
| T-slot width / Number | 12 H7 / 4, Hardened & ground table & T-slots |
| Guide block width | 18mm |
| Maximum work-table load | 220 lbs. / 10 kgs |
| Maximum part swing | ∅ 16.3″ / ∅ 414mm |
| Spindle | |
| Spindle Motor – S1/S2/S3 =11/15/18.5kw | 25-Horsepower Peak, 20-HP 30-minute duty-rating |
| Spindle Speed – Mitsubishi Inline Direct-Drive | 12,000rpm (15,000rpm optional) |
| Spindle Torque | 90 ft-lb @ 1,500 rpm |
| Tool Type | CAT #40 Taper BT #40 optional |
| Retention Knob (Pull Stud) | C40-4502H coolant C40-4502S solid |
| Spindle Runout | ≤0.000040 T.I.R. |
| Spindle Bearings – Front | 110mm NSK 70BNR, 2 – P4 class-7 bearings |
| Spindle Bearings – Rear | 110mm NSK 70BNR, 2 – P4 class-7 bearings |
| Retention System/Holding Capability | Bellville Spring Stack, 1650-1760 lbs. |
| Retention Knob Specification | #40 Japanese standard, JMTBA double 45° head angle Ø.590” |
| Axis Feeds | |
| Accuracy X, Y, & Z Axis (JIS6338) | ±0.0002” / 12” ± 0.005mm over 300mm travel |
| Repeatability X, Y, & Z Axis (JIS6338) | ±0.0002” / 12” ± 0.005mm over 300mm travel |
| Least Input Command Increment | 0.0001” / 0.000040” 0.001mm / (40-millionths in metric) |
| Rapid Traverse – X and Y | 1,417 ipm, 36m / minute |
| Rapid Traverse – Z | 1,260 ipm, 32m / minute |
| Cutting Feedrate | 0.02 – 393 ipm, 10m / minute |
| Axis Drive Motor Power – X, Y, Z | 5-HP, 3.5kw |
| Ballscrews – X, Y, Z | 40mm ballscrews with 12mm pitch |
| Tool Changer | |
| Tool Capacity (40+1) | 40 Tool Twin-Arm, Chain-Drive Storage Rack |
| Tool Shank | CAT#40 Taper BT#40 optional |
| Tool Change Time | 1.7-sec. tool-to-tool |
| Maximum Tool Diameter / with adjacent tool | 5.90” / 3.15” 150mm / 80mm |
| Maximum Tool Length / Weight | 11.81” / 15 lbs. 300mm 7kg |
| Tool Selection / Tool Access | Random Access / Bi-Directional |
| Specifications | |
| Air Service Requirements | 85 psi @ 14-scfm |
| Coolant Capacity / Pressure | 97-gallons / 300 psi, 256 liters / 20-bar |
| Connected Load Electrical Requirement | 50 Amps / 220vac ±5%, 60-Hz |
| Floor space requirements (W x D x H) | 115” x 82” x 116” (add 48” on left side for conveyor |
| Shipping dimensions (W x D x H) | 169” x 92” x 96” (306x231x256cm) |
| Machine Weigh | 15,708 lbs. 7,120 kgs |
| Warranty – 1-year machine warranty | 3-year Mitsubishi control, motors, & drive warranty |
 |
 |