Features
| 32mm 1-1/4” Bar Capacity | 6,000 RPM A2-5 Spindle |
| 7.5 Horsepower | Parts Catcher Standard |
| Live Tooling Options | 8-Station Turret Optional |
Specifications
| Axis Travel | GEN TURN 32-GT |
| X-Travel | 8.46” (215mm |
| Z-Travel | 5.98” (152mm) |
| Maximum Turning Diameter/Length | 7.87” / 5.5” (200mm / 140mm) |
| Swing Over Bedways | 12.59” (320mm) |
| Axis Feeds | |
| Rapid Traverse – X, Z | 787 ipm 20/20m/minute |
| Rated Cutting Feedrate | 236 ipm 6/6m/minute |
| Mechanical Way System – X/Z | Box Ways / Turcite® Coated & Pressure Lubricated |
| Slant Bed Angle | 20º Slant Bed Angle for Tooling |
| Axis Drive Motor Power – X-Axis | 1.0-HP .75 kw |
| Axis Drive Motor Power – Z-Axis | 1-1/3-HP 1.0 kw |
| Ballscrew Diameter – X, Z | 32mm |
| Positioning Accuracy – X/Z- X/Z | ±0.00015” / ±0.004mm |
| Positioning Repeatability – X/Z | ±0.00008” / ±0.002mm |
| Least Input Command Increment | 0.0001” / 0.000040” / 0.001mm / (40-millionths in metric) |
| Spindle | |
| Spindle Nose Mount | A2-5 |
| Spindle Speed | 6,000 |
| Maximum Tapping Spindle Speed | 2,000 rpm |
| Maximum Bar Capacity | 1-1/4”, 32mm |
| Spindle Bore | 34mm |
| Spindle Bearing – Inside Diameter | 70mm (80mm Optional) |
| Spindle Motor Power – 3.7/5.5kw | 7.5-HP / 5.5kw (10-HP 7.5kw Spindle Motor Optional) |
| Spindle Motor Torque | 26 ft. lbs. 35Nm |
| Spindle Motor Drive Coupling | Belt Drive |
| Spindle Runout | ≤ 0.000040” T.I.R. |
| Tool Plate / Tool System | |
| Tool Plate Overall Dimensions | 8.66” x 36.45” / 220mm x 706mm |
| Tool Plate T-Slot Dimensions | 21mm Base & 12mm Neck Width, (8mm Base Height /17mm total) |
| T-Slots | 3 T-Slots on 63mm Centers (See Power Point for Drawings) |
| Turning Tool Shank Size | 20mm 3/4” Square Shank |
| Internal Tool Shank Size | 32mm 1-1/4” (25mm for Optional Tool Turret Bores) |
| Optional Driven Tool Horsepower (.75kw) | 11-Horsepower with 2:1 Speed Reduction for Increased Torque |
| Optional Driven Tool Collet Size (1/2”) | 2-ER20 Collets in a Hydraulic Positioned Upper/Lower Format |
| Specifications | |
| Air Service Requirements | 85 psi @ 5-scfm / 5.5 Kg/cm2 |
| Electrical Requirements – Connected Load | 10kva, 28-Amps 220vac ±5%, 60-Hz |
| Coolant Tank Capacity / Motor Power | 21-gallons / 1/2-HP / 80-liters / 2-amps |
| Lubrication Pump | 150 watts |
| Hydraulic Pump Motor / Pressure | 1-HP / 500 PSI / .75 kw / 32-bar |
| Floor space requirements (W x D x H) | 81” x 64” x 64” / 282x135x183cm (+ Chip Conveyor) |
| Machine Weight | 4,850 pounds (2,200 kg) |
| Warranty – 1-year machine warranty | 3-year Mitsubishi Control, Motors, & Drive Warranty |
 |
 |