Features
| 36mm 1-3/8” Bar Capacity | 18-Tools with 7-Driven Tools Standard |
| “C” Axis and “Y” Axis with 19” Travel | 1,181 Inch per Minute Rapid Rates |
| Parts Catcher and Chip Auger Included |
Specifications
| Axis Travel | GEN TURN 32-NCY |
| CNC Controlled Axis | 4-Axis (X, Y, Z, C) with High-Performance C-axis |
| X-Axis Travel (Vertical Tool) | 7.5” (190mm) Linear Ways |
| Y-Axis Travel (Cross Tool) | 19.3” (490mm) Linear Ways – True Y-axis |
| Z-Axis Travel (Sliding Headstock) | 6.5” (165mm) Linear Ways |
| C-Axis Travel (Rotational Axis) | 360 degrees (360,000 Radial Positions) |
| Spindle | |
| Spindle Bore | 1.456” (37mm) |
| B&S#22 or Traub A-32 Collet Capacity | 1.25” (32mm), 1-3/8” (36mm) Collet Adapter Available |
| Spindle Speed Range | 100-6,000 RPM |
| Spindle Horsepower | 10-HP 3,000 RPM Spindle Motor (2:1 Pulley Ratio) |
| Spindle Center Height | 38” (965mm) |
| Rigid Tapping on Main Spindle | Yes |
| Spindle bearing (Ø110mm) | 5-Ball Bearing Spindle, 3-Front & 2-Rear Bearings |
| Tooling System | |
| Number and Size of Turning Stations | 6 Tools of 1/2” or 12mm (5 stations of 5/8” Optional) |
| Number of Internal Static Tools | 5 ID Tool Stations (25mm Bores) for Tool Bushings/Collets |
| I.D. Tool Bores (Round Shank) | 25mm Bore for ER-20 Collet, Split or Solid Tool Bushings |
| Driven Tool System | |
| Number of Cross Working Driven Tools | 4-Cross Driven Tool Stations with ER20 Collet Holders |
| Number of End Working Live Tools | 3-Axial Driven Tool Stations with ER20 Collet Holders |
| Size of Driven Tools (Round Shank) | ER-20 Collet Capacity (1/16” –1/2”) (1-13mm) Diameter |
| Rigid Tapping with Driven Tools | Included for Main Spindle and Driven Tools |
| Driven Tool Programmable Range | 0-4,000 RPM – Step-Less Speed Range |
| Driven Tool HP | Radial 2.0-HP(1.5kw), Axial 1.0-HP (0.75kw |
| Axis Drives | |
| Rapid Travers Rate – X, Y, & Z axis | 1,181 ipm (30m/minute |
| Maximum Federate for Thread Cutting | 236 ipm (6m/minute |
| Minimum Programmable Input | 0.0001” (0.001mm = 40 millionths of an inch) |
| C-Axis Resolution | 0.001 degree (360,000 Radial Positions) |
| Brushless AC Servo Motor Drive | X = 2-HP (1.5kw), Y&Z = 1.5-HP (1.0kw) |
| Ballscrew Diameter | 25mm Diameter – 10mm Pitch Double-Nut Ballscrews |
| System Requirements | |
| Electrical Requirements | 6 KVA – 42 amps @ 220 vac ±5% 3-Phase |
| Pneumatic Requirements | 85 psi @ 10-cfm for Parts Catcher and Spindle Brake |
| Hydraulic System Capacity | 10-gallon (40 liter) Hydraulic Tank, 500 psi Pressure |
| Coolant Pump Motor / Tank Capacity | 3/4 HP w/Flow Sensor / 50-gallon Tank with Dual Filtration |
| Automatic Metered Lubrication system | 3-6cc/15-minute (Adjustable Lubrication Flow Rate) |
| Machine Dimensions | |
| Floor Space – L x W x H | 86” x 74” x 76” (2,176 x 1,858 x 1919mm) |
| Machine Spindle Center Height | 38” (965 mm) |
| Machine Net Weight | 6,172 lbs. (2,800 kgs) |
 |
 |