Features
| * 36mm 1-3/8” Bar Capacity | * Dual “C” Axis and “Y” Axis with 19” Travel |
| * 27-Tools with 11-Driven Tools | * Simultaneous Main & Sub-Spindle Machining |
| * Parts Catcher and Chip Conveyor Included | * 1,181 Inch per Minute Rapid Rates |
Specifications
| Main Spindle | GEN TURN 36-CS |
| Maximum RPM/Spindle Bearing | 6,000 RPM / 5-Bearing Spindle, 3-Front, 2-Rear ø110mm |
| Spindle Motor | 10-HP 3,000 rpm spindle Motor, 2:1 Pulley Ratio |
| Collet Nose | Brown & Sharpe #22 or Traub A-32 |
| Drawtube Bore | 1.456” (37mm) |
| Maximum Barstock Diameter | 1.25” (32mm) Standard 1.375” (36mm) with Adapter |
| X-Axis Travel | 7.28” (185mm) |
| Y-Axis Travel (true Y-Axis, not compound Y) | 19.29” (490mm) |
| Z-Axis Travel | 6.50” (165mm) |
| Rapid Travel Speed: X, Y, Z | 1,181 IPM (30m/minute) |
| Minimum Input Unit | 40 millionths (0.00004”) (0.01mm) |
| OD Turning Tool Positions | 6 OD Tools (1/2” or 12mm) (5-5/8” Tool Plate Available) |
| ID Turning Tool Positions | 5 ID Tools |
| OD Turning Tool Size | 1/2” or 12mm (5/8” or 16mm Optional) |
| ID Turning Tool Bore Size | 25 mm |
| Spindle Center Height | 40” (1015mm) |
| Sub-Spindle | |
| Sub-Spindle RPM / Spindle Bearing | 6,000 RPM / 4-Bearing / Quad-Duplex Pair Configuration |
| Sub Spindle Motor | 5-HP 3,000 rpm Spindle motor, 2:1 pulley ratio |
| Collet Nose | Brown & Sharpe #22 or Traub A-32 |
| Maximum Barstock Diameter | 1.250” in Collet Chuck (1.080” (27.5mm) Pass Thru) |
| X-Axis Travel | 11.53” (293mm) |
| Z-Axis Travel | 11.61” (295mm) |
| Minimum Input Unit | 0.0001” (0.001mm = 40 millionths inch) |
| ID Turning Tool Bore Size | 25mm |
| Air Blast Nozzle | Included |
| Finished Parts Ejector | Included, Along with Parts Catcher & Parts Conveyor Belt |
| Live Tooling | |
| Cross Slide Live Tools | 4-ER-20 Cross Slide Live Tools, 4,000 rpm, 2.0 HP (1.5kw) |
| Front Slide Live Tools | 3-ER-20 Front Slide Live Tools, 4,000 rpm, 1.0 HP (0.75kw) |
| Live Tool Collet Size | ER-20 Collet, Ø1/2” (0.5-13mm) Tool Shank Capacity |
| Max RPM for Live Tools | 4,000 RPM (1 cross live tool can be substituted on subspindle tool block) |
| Machine Dimensions | |
| Machine Length | 101” (2420mm) ( *+ 36” for Chip Conveyor) |
| Machine Depth | 68” (1500mm) |
| Machine Height | 80” (1985mm) |
| Machine Weight | 8,000lbs (3,628kgs) |
| Coolant Pump | Dual 50psi 3/4-HP Coolant Pumps for Main and Subspindle |
| Coolant Tank Capacity | 80-gallon Coolant Tank, with Coolant Flow Confirmation Sensor |
| Lubrication Distribution | Way Lube Distributed at 3-6 cc / 15-minute Cycle |
| Machine Power Requirements | 220vac ±5%, 63-amps, 3-phase, 60Hz |
| Air Requirements | 85-PSI at 10-CFM for Parts Catcher, Parts Ejector, & Air Blast |
 |
 |