Features
| 52mm 2” Bar Capacity | Twin 15-HP 6,000 RPM Opposed Spindles |
| 36-Tool Positions – 18-Driven Tools | Machine at Any Angle with 12-Tool “B”-Axis |
| “B” Axis and Dual “Y” Axis for Front & Back Work | Simultaneous Main & Sub-Spindle Machining |
Specifications
| Main Spindle | GEN TURN 52-BY2 |
| Maximum Bar Diameter | A2-5 Spindle with 2.008” (51 mm) Bar Capacity |
| Collet Size / Spindle Bearings | Traub TRB-52 / 5x90mm Ball Bearings, 3-Front, 2-Rear |
| Maximum Spindle Speed | 6,000 RPM (Integral Motor Spindle) |
| Servo Spindle Motor Horsepower | 15-HP (11kw) Peak, 10-HP (7.5kw) 30-min. Rated |
| X1, Y1, Z1 Axis | |
| X1, Y1, Z1 Axis Servo Motor | X1= 1.3 HP. (1.0kw) Y1/Z1= 2.0 HP. (1.5kw) |
| X1 Axis Travel | 10.63” (270mm) |
| Y1 Axis Travel | 18.11” (460mm |
| Z1 Axis Travel | 9.84” (250mm) |
| Minimum Programmable Input | 0.00004” resolution (0.001mm) |
| X1, Y1, Z1 Rapid Travel Rate | 1181 IPM (30m/min) / 0.0001 mm resolution |
| Main Spindle Tooling | |
| Number of Driven Tools | 6 axial & 6 radial driven and “Any-Angle” tools |
| Driven Tool Motor Power | 5-HP (3.5kw) |
| Driven Tool Spindle Speed | 2,500 RPM Maximum Driven Tool Spindle Speed |
| Driven Tool Collet Size | ER-20 Collet Spindles (up to 1/2” Tool Shank) |
| O.D. Turning Tools | 5 – 20mm O.D. Turning Tool Holders Available |
| I.D. Boring Tools | 5 – 25mm I.D. Bores Available for Tool Bushings |
| Sub-Spindle | |
| Maximum Bar Diameter | 2.008” (51 mm) |
| Collet Size | Traub TRB-52 |
| Maximum Spindle Speed | 6,000 RPM (Integral Motor Spindle) |
| Servo Spindle Motor Horsepower | 15-HP (11kw) Peak, 10-HP (7.5kw) 30-min. rated |
| X2, Y2, Z2 Axis | |
| X2, Y2, Z2 Axis Servo Motor | X2/Z2 = 1.3 HP. (1.0kw) Y2 = 2.0 HP. (1.5kw) |
| X2 Axis Travel | 18.89” (480mm) |
| Y2 Axis Travel | 18.11” (460mm) |
| Z2 Axis Travel | 10.63” (270mm) |
| X2, Y2, Z2 Rapid Travel Rate | 1181 IPM (30m/min) |
| Minimum Programmable Input | 0.0001” (0.001mm = 40 millionths of an inch) |
| Ballscrew Diameter | 25mm Diameter with 10mm Pitch for All Axes |
| System Requirements | |
| Number of Axial Driven Tools | 3 Axial Driven Tools, Uses ER-20 Collets |
| Number of Radial Driven Tools | 3 Radial Driven Tools, Uses ER-20 Collets |
| Driven Tool Motor Power | 2.7-HP (2.0kw) |
| Driven Tool Spindle Speed | 3,000 RPM Maximum Driven Tool Spindle Speed |
| Driven Tool Collet Size | ER-20 Collet Spindles (up to 1/2” Tool Shank) |
| O.D. Turning Tools | 4 – 20mm O.D. Turning Tool Holders Available |
| I.D. Boring Tools | 4 – 25mm I.D. Bores Available for Tool Bushings |
| Specifications | |
| Coolant System | 80 Gallon Tank, 4-Coolant Pumps with Flow Control |
| Electrical Requirement | 110-Amps, 42kva, 220 vac ±5%, 3-Phase, |
| Air Requirements | 85 psi, 20-cfm, for Parts Catcher, Ejector, Oil Mist Unit |
| Machine Weight | 12,345 pounds (5,600 kgs) |
| Machine Dimensions | 110”* x 85” x 82” (WxDxH) (* = 38” for Chip Conveyor) |
| Shipping Dimensions | 150” x 90” x 87” (WxDxH) |
 |
 |