Features
| * 2” Bar Capacity with 6,000 RPM Spindle | * Full “C” Axis on Main Spindle and Sub Spindle |
| * Full “Y” Axis on Main Spindle and Sub Spindle | * 33 Total Tool Positions with 13 Live Tools |
| * Simultaneous Main and Sub-Spindle Machining | * Parts Catcher and Chip Conveyor Standard |
Specifications
| Main Spindle | GEN TURN 52-CS Y2 |
| Maximum RPM/Spindle Bearing | 6,000 RPM |
| Spindle Motor | 10-HP (7.5 kw) |
| Collet Nose / Spindle Bore | Traub A-52 / 52mm (uses TRB-52 collet) |
| Maximum Barstock Diameter | 2” (51mm) |
| Maximum Cut Length | 4.33” (110mm) |
| Remnant Length – with guide bushing / without | 2.13” / 7.64” (54mm / 194mm) Spindle Center |
| Center Height | 43.3” (1100mm) |
| Sub-Spindle | |
| Sub-Spindle RPM / Spindle Bearing | 6,000 RPM / 4-Bearing / Quad-Duplex Pair Configuration |
| Spindle Motor | 6-HP (4.4kw) |
| Collet Nose / Spindle Bore | Traub A-42 / 43mm (uses TRB-42 collet) |
| External Air Blast nozzle | Included for both main & subspindle |
| Finished Parts Ejector & air blast | Included for subspindle |
| Axis Specifications | |
| X¹-axis Travel | 8.66” (220mm) |
| Y¹-axis Travel (true Y-axis, not compound Y) | 24.41” (620mm) |
| Z¹-axis Travel | 16.0” (406mm) |
| Travel | 14.9” (380mm) |
| Y²-axis Travel (true Y-axis, not compound Y) | 5.11” (130mm) |
| Z²-axis Travel | 18.1” (460mm) Rapid |
| Traverse Rate – X¹, X², Y¹, Z¹, Z² | 1,181 IPM (30 m/min) Rapid |
| Travers Rate – Y² | 196 IPM (5 m/min) |
| Axis Drive Servo Horsepower: X¹/Y¹/Z¹ | 1-3/4 / 1-3/4 / 1-1/8HP (1.3kw / 1.3kw / .85kw) Axis |
| Drive Servo Horsepower: X²/Y²/Z² | 1-1/8 / 1.0 / 1-1/8HP (.85kw /.75kw / .85kw) |
| Minimum input unit | 0.0001” (0.001mm = 40 millionths inch) |
| Tooling | |
| Main 33-Tool Positions Standard | 5-ER-20 cross slide live tools, 6,000 rpm, 2.0 HP (1.5kw) |
| Main Spindle Cross slide radial live tools | 3-ER-20 front slide live tools, 6,000 rpm, 1.0 HP (0.75kw) |
| Main Spindle Front slide axial live tools | 6 (5x 5/8” + 1x 3/4”) (5x16mm) + (1x20mm) |
| Spindle OD Turning Tool Positions | 5 ID Tool Bores (25mm) |
| Main Spindle ID Turning Tool Positions | 5 ID Tool Bores (25mm) (back of main tool bores) |
| Subspindle ID Turning Tool Positions | 4 ID Tool Bores (static holders in subspindle tool block) |
| Turning Tool Positions | 8-ER-20 (can add 4 more) 6,000 rpm, 4.0 HP (3kw) |
| Subspindle Back slide axial live tools | (1 radial live tool can be substituted on subspindle tool block) |
| Machine Dimensions | |
| Machine Length | 113” add 31” for chip conveyor |
| Machine Depth | 71” (1803mm) |
| Machine Height | 78” (1977mm) |
| Machine Weight | 13,880lbs (6,300kgs) |
| Coolant Pump | Dual 50psi 1-HP Coolant Pumps for main and subspindle |
| Coolant Tank Capacity | 63-gallon coolant tank, with coolant flow confirmation sensor |
| Lubrication Distribution | Way lube distributed at 3-6 cc / 15 minute cycle |
| Hydraulic System | power / capacity 1-HP / 12-gallons (0.75kw / 46L) |
| Machine Power Requirements | 220vac ±5%, 35kva, 3-phase, 92 amps, 60Hz |
| Air Requirements | 85-PSI at 10-CFM for parts catcher, parts ejector, & air blast |
 |
 |