Features
| 52mm 2” Bar Capacity | Twin 15-HP 6,000 RPM Opposed Spindles |
| Dual Parallel Gang-Tooled Cross-Slides | Simultaneous Main & Sub-Spindle Machining |
| “C”-Axis on both spindles for Live Tooling Options | Faster than a Twin-Spindle Twin-Turret Lathe |
Specifications
| Main & Sub Spindle | GEN TURN 52-GTS |
| Spindle Motors: 11 kw 30-minute rated | 15 HP (Spindle Motor Chiller Included) |
| Maximum RPM | 6,000 RPM with Spindle Orient |
| Spindle Bearing | 5-Bearing Spindle, 3-Front Ball Bearings, 2-Rear |
| Spindle Nose | A2 – 5 |
| Collet Nose | Traub A – 52 (3J, 22J, 16C, S20 adapters available) |
| Drawtube ID | 2.086” (53 mm) |
| Collet Capacity | 2.047” (52 mm) |
| Spindle Center Height to Cross-Slide | 3.464” (88 mm) |
| Spindle Center Height to Floor | 42.2” (1,070 mm |
| Machine Axis | |
| Axis Drives & Motors (1.0 kw) | 1.35-HP Mitsubishi Mel-Pro Motors and Drives |
| X-Axis Travel: Twin Cross-Slides | 13” (330 mm) on Both Gang Slides |
| Z-Axis Travel: Twin Opposed Spindles | 10.63” (270 mm) (on Both Main and Sub Spindle) |
| Axis Servo Motor Power | X-Axis 2.0 HP (1.5 kw), Z-Axis 1.5 HP (1.0 kw) |
| Rapid Travel Speed – X & Z | 1,181 IPM (30 m / minute) |
| Z-Axis Thrust | 714 lbs. Thrust (8,574 in / lbs.) |
| Minimum Input Unit | 0.0001” (0.001 mm = 40 millionths of an inch) |
| Tooling | |
| OD Turning Tool Size | 3/4” Standard |
| ID Turning Tool Size | 20 mm (3/4” Available) |
| Cross-Slide T-Slot dimensions | 5-T-Slots on 32 mm Centers (10 mm Slot, 18mm Base) |
| Fluid Systems | |
| Coolant Tank Capacity | 52-Gallons (210 L) with Coolant Flow Monitor |
| Coolant Pump | Dual 3/4-HP, 45-PSI Pumps (for Main and Sub Spindle) |
| Hydraulic System: (550 PSI) | 10 gallons (45 liters) ISO VG32 (Mobil DTE-24) |
| Spindle Oil Cooler System | 5.5 gallons (25 liters) ISO 10 (Mobil Velocite No. 6) |
| Way Lubrication Distribution (ISO-VG68) | .5 gallons (2-liters) Distributed at 3-6 cc / 15-Minute Cycle |
| Specifications | |
| Length | 118” (2,980 mm) + 25” Chip Conveyor |
| Width | 54” (1,356 mm) + 21” Coolant Tank |
| Height | 78” (1,760 mm) |
| Net Weight | 9,922 lbs. (4,500 kg) |
| Power Requirements | 220 vac ±5%, 3-Phase, 60-Hz, 63 Amps, 24 kVA |
| Air Requirements | 85-PSI, 10-cfm (Parts Catcher, Parts Ejector, Air Blast) |
 |
 |