Features
| Double “Y” Axis and Double “C” Axis | Simultaneous Main & Sub-Spindle Machining |
| 30-Tools with 8-Driven Tools Standard | Removable Rotary Synchronous Guide-Bushing |
| Cutting Oil Chiller for Consistent Thermal Stability | High-Performance Mitsubishi M-830 Control |
Specifications
| Main Spindle | GEN TURN SL-20Y2 |
| Maximum RPM/Spindle Bearing | 10,000 RPM / 5-Bearing Spindle, 3-Front, 2-Rear Ball Bearings |
| Main Spindle Servo Motor (2.2/3.7Kw) | 5-Horsepower 15-minute Duty-Rated (3-HP Constant Duty-Rated) |
| Collet Style for Main & Subspindle | Hardinge TF-25S / Southwick & Meister TS-25 / Star SR-20 |
| Collet Actuation System | Pneumatic Piston-Driven Toggle Clamp Feed-Finger Style |
| Synchronous Rotary Guide-Bushing | TD25S (20mm Round, 16mm Hex, 12mm Square) |
| Maximum Barstock Diameter | 20mm (Collet Range – 1/16” – 13/16” / 0.0200” – 0.813”) |
| Maximum Distance Between Spindles | 23.6” (600mm |
| Spindle Centerline Height | 42” (1060mm) |
| Main Spindle Tooling | |
| O.D. Turning Tool Holders – S1 | 6 – 12mm Square Shank Turning Tool Holders |
| I.D. Internal Tool Holders – S1 | 4 – 22mm Shank Round Tool Sleeve Bores |
| I.D. Deep Hole Drill Positions – S1 | 2 – 22mm Shank Round Tool Sleeve Bores |
| Cross Slide Live Tools – S1 | 5 – ER-16 Cross Slide Live Tools, 8,000 rpm, 1.6 HP (1.2kw) |
| Axial Front Slide Live Tool Option – S1 | 3 – ER-16 Front Slide Live Tools – Optional in lieu of 1 Cross Tool |
| Maximum Drilling / Tapping Capacity | 10mm Drilling Capacity / M8 Tap – Main Spindle |
| Cross Drilling / Tapping Capacity | 8mm Drilling Capacity / M6 Tap – Driven Cross Tools |
| Sub-Spindle | |
| Sub-Spindle RPM / Spindle Bearing | 8,000 RPM / 4-Bearing – Quad-Duplex Pair Configuration |
| Sub-Spindle Servo Moto (2.2/3.7Kw) | 5-Horsepower 15-Minute Duty-Rated (3-HP Constant Duty-Rated) |
| Collet Style for Main & Sub-Spindle | Hardinge TF-25S / Southwick & Meister TS-25 / Star-SR20 |
| Collet Actuation System | Pneumatic Piston-Driven Toggle Clamp Feed-Finger Style |
| Maximum Barstock Diameter | 23mm (Collet Range – 1/16” – 13/16” / 0.0200” – 0.813”) |
| Finished Parts Ejector & Air Blast | Included (Can Pass Long 20mm Parts Through the Subspindle) |
| Maximum Workpiece Length for Front Ejection | 110mm Maximum Part Length for Front Ejection from Subspindle |
| Sub-Spindle Tooling | |
| O.D. Turning Tool Holders – S2 | 3 – 10mm Square Shank Turning Tool Holders |
| I.D. Internal Tool Holders – S2 | 4 – 22mm Shank Round Tool Sleeve Bores |
| I.D. Internal Tool Holders – S2 (8 possible) | 3 – ER-16 Fixed Tools – Ø3/8” Max. |
| Sub-Spindle Axial Live Tools – S2 (8 possible) | 3 – ER-16 Axial Live Tools, 4,000 rpm, 1.0 HP (0.75kw) |
| Backworking Machining Length | 6.1” Maximum Turning Length / 3.14” Maximum Boring Length |
| Maximum Drilling / Tapping Capacity | 10mm Drilling Capacity / M8 Tap – Sub-Spindle |
| Maximum Cross Drilling / Tapping Capacity | 8mm Drilling Capacity / M6 Tap – Driven Cross Tools |
| Axis | |
| Main Spindle Stroke | 9.840” Single Stroke (250mm) |
| Maximum Turning Length – Rotary Bushing | 7.48” (190mm) |
| Maximum Turning Length – Without Bushing | 2.36” (60mm) |
| X1, Y1, Z1, X2, Y2, Z2 Rapid Traverse Rate | 944 IPM (24m/minute) |
| X1, Y1, Z1 Axis Motor Power | 1-Horsepower (.75kw |
| X2, Y2, Z2 Axis Motor Power | .67-Horsepower (.5kw |
| Minimum Input Unit | 0.0001” (0.001mm = 40 millionths/inch) |
| Specifications | |
| Machine Dimensions (L x W x H) | 118” x 55” x 78” (2846x1284x2024) +31” for Conveyor) |
| Machine Weight | 5,954 lbs. (2700kgs) |
| Coolant Pump Power | 1.5-Horsepower (1.2kw) |
| Coolant Tank Capacity | 58-gallon Coolant Tank (220 L) (Cutting Oil Only, No Coolant) |
| Lubrication Distribution (2-liter Capacity) | Way Lube Distributed at 3-6 cc / 15-Minute Cycle |
| Machine Power Requirements | 220vac ±5%, 53-amps, 20kva, 3-phase, 60Hz |
| Air Requirements | 85-PSI at 6-CFM for Parts Catcher, Parts Ejector, & Air Bast |
 |
 |