Kingston’s CS model is our first choice when you need to go larger (45″ swing) and longer (up to 240″ CC). Combining a mighty 60 HP Fanuc AC spindle motor for raw muscle and a 28.5″ bed way with box way cross slide for increased stability, the beefy CS is a perfect marriage of power and accuracy. Available in 7.1″, 10.0″, or 14.7″ spindle bores, with lengths from 80″ — 240″ between centers.
Specifications
| Capacity | CS 7 | CS 10 | CS 14 |
| Swing Over Bed | 45″ | 45″ | 45″ |
| Swing Over Cross Slide | 27.5″ | 27.5″ | 27.5″ |
| Maximum Cutting Diameter | 41.5″ | 41.5″ | 41.5″ |
| Distance Between Centers | 80” / 120” / 160” / 200” / 240” | 80” / 120” / 160” / 200” / 240” | 80” / 120” / 160” / 200” / 240” |
| Maximum Cutting Length | 80” / 120” / 160” / 200” / 240” | 0” / 120” / 160” / 200” / 240” | 80” / 120” / 160” / 200” / 240” |
| Width of Bed | 28.5″ | 28.5″ | 28.5″ |
| Headstock | CS 7 | CS 10 | CS 14 |
| Spindle Bore | 7.1″ | 10.0″ | 14.7″ |
| Spindle Motor | 50 HP / 60 HP (30min) | 50 HP / 60 HP (30min) | 50 HP / 60 HP (30min) |
| Type of Spindle Nose | A2-15 | A2-15 | A2-20 |
| Gear Box | CS 7 | CS 10 | CS 14 |
| Number of Speed Ranges | 2 | 2 | 2 |
| Spindle Speed (RPM) | 6-650 | 6-650 | 4-450 |
| Turret | CS 7 | CS 10 | CS 14 |
| Turret | V8 Hydraulic (Std), H4 (Opt) | V8 Hydraulic (Std), H4 (Opt) | V8 Hydraulic (Std), H4 (Opt) |
| Traverse | CS 7 | CS 10 | CS 14 |
| Max. Stroke X-Axis | 22.0″ | 22.0″ | 22.0″ |
| Max. Stroke Z-Axis | 82.7” / 120.0” / 161.4” / 200.8” / 240.1” | 82.7” / 120.0” / 161.4” / 200.8” / 240.1” | 82.7” / 120.0” / 161.4” / 200.8” / 240.1” |
| Rapid Traverse X-Axis | 236”/min | 236”/min | 236”/min |
| Rapid Travers Z-Axis | 236”/min | 236”/min | 236”/min |
| Motor | CS 7 | CS 10 | CS 14 |
| Servo Motor X-Axis | 5.3 HP | 5.3 HP | 5.3 HP |
| Servo Motor Z-Axis | 8 HP | 8 HP | 8 HP |
| Ball Screw | CS 7 | CS 10 | CS 14 |
| X-Axis | Ø1.41”, P6 | Ø1.41”, P6 | Ø1.41”, P6 |
| Z-Axis | Ø2.48”, P12 | Ø2.48”, P12 | Ø2.48”, P12 |
| Tailstock | CS 7 | CS 10 | CS 14 |
| Tailstock Quill (Nose, Taper, Bearing) | A-1-8, M.T. #6, 33024 | A-1-8, M.T. #6, 33024 | A-1-8, M.T. #6, 33024 |
| Tailstock Quill Diameter | Ø9.4” | Ø9.4” | Ø9.4” |
| Tailstock Quill Travel | 7.1″ | 7.1″ | 7.1″ |
| Dimensions | CS 7 | CS 10 | CS 14 |
| Floor Space (L x W) | 229” / 269” / 347” / 387” / 426” x 119” | 229” / 269” / 347” / 387” / 426” x 119” | 229” / 269” / 347” / 387” / 426” x 119” |
| Machine Height | 88.7″ | 88.7″ | 88.7″ |
| Weight | CS 7 | CS 10 | CS 14 |
| Net Weight (lbs.) | 29,172 / 33,242 / 37,356 / 41,470 / 45,606 | 29,172 / 33,242 / 37,356 / 41,470 / 45,606 | 29,172 / 33,242 / 37,356 / 41,470 / 45,606 |
| Total Power Required | CS 7 | CS 10 | CS 14 |
| 100 KVA | 100 KVA | 100 KVA |
| STANDARD FEATURES | OPTIONAL ACCESSORIES |
| Bore: 7.1″, 10.0″, or 14.7″ | Additional Rear Turret: Hydraulic H4 (350) |
| Swing: 45″ | Small Steady Rest with 2 Sets of Jaws (1.57″ ~ 8.66″, 8.26″ ~ 15.35″) |
| C.C.: 80″ – 240″ | Large Steady Rest with 2 Sets of Jaws (13.77″ ~ 20.47″, 20.47″ ~ 27.55″) |
| 50 HP / 60 HP (30 min) | 7″ Boring Bar Support (Other sizes available) |
| 28.5″ Bed Width | Reducer Sleeves for Boring Bar Supports |
| Box Way Cross Slide and Carriage | Extra High Pressure Coolant Pump |
| V8 Hydraulic Turret (H4 also available) | Front Chip Conveyor |
| Front & Rear Chuck Ready | Manual, Hydraulic & Air Chucks |
| Rear Spindle Safety Door | |
| Coolant System w/6-Bar Pressure | |
| Water Spray Gun for Chip Cleanup | |
| Rear Chip Conveyor | |
| Fanuc 0iTF-Plus Controller w/Manual Guide i & Threading Repair, 10.4″ Monitor |
 |
 |