Kingston HSX HD 67 / 73 / 79 Ultra Large Swing Lathes
Kingston’s HSX-HD model, otherwise known as “The Green Giant,” can hold 28,000 lbs. between centers, 35,000 lbs. with one steady rest, and 55,000 lbs. with two roller brackets. Available in swings up to 79” (66” over cross slide and 100” in the gap) and lengths up to 12 meters.
What else needs to be said?
Specifications
| Capacity |
HSX-HD |
| Swing Over Bed |
67″ / 73″ / 79″ |
| Swing Over Cross Slide |
50″ / 60″ / 66″ |
| Swing in Gap |
88″ / 94″ / 100″ |
| Width of Bed |
40″ |
| Distance Between Centers |
80” – 472” |
| Headstock |
HSX-HD |
| Spindle Bore |
6” or 8” |
| Type of Spindle Nose |
ASA A2-15 |
| Number of Spindle Speeds |
12 |
| Spindle Speed |
1.7 – 170 RPM |
| Gear Box |
HSX-HD |
| Number of Feed Changes |
60 Kinds |
| Longitudinal Cross |
0.003 – .19in/rev / 0.0016 – 0.098 in/rev |
| Leadscrew Diam. & Threads per Inch |
2 1/2” & 2 TPI |
| Threading range – Whitworth |
½ – 28 TPI (50 kinds) |
| Threading range – Metric |
1 to 56mm pitch (32 kinds) |
| Tool Slide |
HSX-HD |
| Maximum Travel of Compound |
8.85” |
| Maximum Travel of Cross Slide |
39.3” |
| Tailstock |
HSX-HD |
| Tailstock Quill Travel |
11.8” |
| Tailstock Quill Diameter |
7.08” |
| Tailstock Center |
M.T. #7 |
| Motor |
HSX-HD |
| Main Drive Motor |
40HP (Opt. 50HP) |
| Rapid Travel Motor |
2 HP |
| Dimensions |
HSX-HD |
| Packing Dimensions 89” W x 99”H |
192” – 586” L |
| Weight (lbs.) |
33,069 – 77,160 lbs. |
| Loading Capacity Between Centers |
28,660 lbs. |
| With One Steady Rest |
35,273 lbs. |
| With Two Roller Rests |
55,225 lbs. |
| Standard Features |
Optional Accessories |
| 40 HP, 6P Main Motor, 460V/60HZ/3PH |
70.9” Face Plate & Boring Mill Jaws (4pc Independent) |
| 6” Spindle Bore (Opt. 8” Bore) |
11.8” Steady Rest with Roller Jaws (Min. Capacity 2.78”) |
| Spindle Nose: ASA-A2-15 |
23.6” Steady Rest |
| 4-Jaw 55” Face Plate |
35.43” Steady Rest |
| 1 x 23.6” Steady Rest with Roller Jaw (Min. Capacity11.02”) |
Follow Rest (Pad Jaw) |
| Hardened and Ground Bedway’s |
Roller Rest (Two point) |
| Tool Slide with T-Slot |
Halogen Work Light |
| Motorized Tailstock Body |
Rotating Quill Type Tailstock |
| Coolant System with Pump and Piping |
50HP Main Motor Upgrade |
| Toolbox with Necessary Wrenches & Spanners |
8” Bore Upgrade |
| Instruction Manual and Parts List |
Traveling Chip Guard (Follows the carriage) |
|
Longitudinal Feed Stop |
|
Digital Readout (DRO) |
|
Aloris Tool Post & Sets |
|
3-Jaw and 4-Jaw Manual Chucks |
