Model 138LRC features tapered rollers to maintain product orientation. Reversible, it is also commonly slave driven from 138LR and 138VP making it the ideal spur in light duty applications.
Specifications
| Tread Rollers | 1.9″ dia. to 1-3/8″ dia. x 16 ga. tapered rollers, model 138T; 1-3/8″ dia. x 18 ga., model 138G w/ 5/16″ hex, galvanized straight tangent rollers. |
| Roller Centers | 1-9/16″ measured at inside radius of unit. |
| Pressure Sheaves | Provides drive belt pressure to upper tread rollers. |
| Belting | “B” section V-belt. |
| Take-Up | Screw type adjustable sheave with flat idler sheaves to maintain belt tension. |
| Tangents | 12″ both ends on 60/30 degree unit; 18″ both ends on 45/45 degree unit. |
| Bed | 6″ x 1-1/2″ x 12 ga. formed steel channel frame. |
| Bearings | End shafts are supported by precision, heavy duty, lubricated, ball bearing units with cast iron housings. |
| Roller Chain | Drive shaft is driven by No. 50 chain. |
| Floor Supports | Optional |
| Motor Drive | 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor, located under tangent straight section bed. |
| Drive Location | Drive located on outside of curve. Specify left hand tangent length, right hand tangent length and drive location (“left hand drive” or “right hand drive”). NOTE: Drive hand determined with reference point located at outside of curve. For models slave driven (less drive), specify drive shaft location. |
| Capacity | 300 lb. total distributed live load. |
| Speed | 60 FPM, constant. |
 |
 |