251CDLRC, heavy duty chain driven live roller curve, transports heavy unit loads. Heavy castings, drums and other loads not requiring product orientation may be effectively conveyed on this conveyor.
Specifications
| Tread Rollers | 2-1/2″ dia. x 11 ga. steel, model 251S with sprockets. |
| Chain Drive | Roller to roller with No. 60 circular roller chain. |
| End Drive | Reversible drive either side mounted or underside mounted (specify). Main drive roller is supported by precision, heavy duty, lubricated, ball bearing units. |
| Bearings | Removable type, heavy duty, ball bearings, zinc plated, grease packed, labyrinth sealed. |
| Roller Centers | 6″ RC measured at outside radius of curve. |
| Motor Drive | 3/4 HP, 230/460/3, 60 cycle, ODP right angle gear motor. |
| Speed | 35 FPM, constant. |
| Bed | 6″ x 1-1/2″ x 7 ga. and 4″ x 1-1/2″ x 7 ga. formed steel channel frame. |
| Chain Guard | The chain drive is completely enclosed along the entire length of the conveyor. |
| Drive Location | Drive located on outside of curve. Specify right hand drive or left-hand drive (drive hand determined with reference point located at outside of curve). |
| Floor Supports | Optional |
| Electrical Controls | Optional |
 |
 |