Chain transfers convey heavy duty unit loads to 3000 lbs. at 90° intervals and often are suited for applications in tight quarters where room does not exist for large radius curves.
Specifications
| Transfer Arm | 7 ga. formed channel. |
| Transfer Chain | No. 60 flat side bar chain. |
| Standard Lengths | 3’, 4’, 5’, 6’, 7’ and 8’ unit lengths. |
| Chain Centers | 18” |
| Chain Take-Up | Screw Type. |
| End Drive | Allows one-direction (unit) operation; add optional center drive for reversible application. |
| Lift | Pivot type. |
| Bearings | Heavy duty, lubricated, ball bearing unit with cast iron housings. |
| Chain Speed | 35 FPM constant. |
| Motor Drive | 1/2 HP, 230/460/3, 60 cycle, Super “E” right angle gear motor. |
| Capacity | 3000 lbs. |
| Air Controls | Air bag(s) with single solenoid valve. (60-80) psi required. |
| Cutouts | Required through conveyor frame transfer mounts in when using end drive; may be required by application for center drive transfers also. |
| Electrical Controls | Optional |
 |
 |