Roach SZ196ZPA Smart ZONE® safely accumulates packages with zero back pressure utilizing zone singulation operation. Loads up to 125 lbs./ft. may be effectively handled with its unique design. This conveyor features NO minimum weight limitations. Roach Smart ZONE® replaces sensor rollers with photo electric sensors to accumulate products with previously difficult minimal weight restrictions and is easy to install.
Specifications
| Tread Rollers | 1.9″ dia. x 16 ga. steel, model 196S |
| Pressure Rollers | 1.9″ dia. x 16 ga. steel, model 196S; 8″ BF with 6″ wide belt |
| Return Rollers | 1.9″ dia. x 16 ga. steel, model 196S adjustable. |
| Belting | 6″ wide black PVC-120 COS |
| Drive Pulley | 4″ dia. with 1-3/16″ dia. shaft or 8″ dia. with 1-7/16″ dia. shaft; both crowned and fully lagged. |
| End Pulley | 4″ dia., crowned, with 1-3/16″ dia. shaft. |
| Bearings | All pulley bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings. |
| Speed | 60 FPM, constant |
| Bed | 7″ x 1-1/2″ x 12 ga. channel frame slotted for tread rollers to pop-out. When unit is installed at 7′-0″ elevation or higher, rollers must be retained in conveyor frame. Specify desired elevation. Bed sections attached with couplings and floor supports. |
| Squaring Rods | Adjustable rods on underside of bed allow frame to be squared for improved belt tracking and are standard on all units over 30′ |
| Floor supports | Optional |
| Motor Drive | 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor. |
| Roller Chain | Drive pulley is driven by No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up provided on motor base. |
| Accumulation | Zone singulation operation; 3″ RC = 2′-0″ long zones; 4-1/2″ RC = 3′-0″ long zones. 1′-0″ of live roller at each end of conveyor over end plates remains “live” during operation. Zones are pneumatically actuated using photo electric sensors. |
| Pneumatic Actuation | Maximum air line pressure should not exceed 30 PSI. |
| FRL | Unit is provided with filter, regulator, lubricator with 1/4″ ports. |
| Electrical Controls | Optional |
 |
 |