SZD192CDA SMART ZONE® is a medium duty roll-to-roll chain driven zero pressure accumulator, designed to safely accumulate medium duty loads in 5’ zones. Roach SMART ZONE®incorporates photo electric sensors to detect product loads instead of sensor rollers-which eliminates many problems associated with sensor rollers. Products do not touch during accumulation and are singulated individually off of conveyor. SMART ZONE® is easy to install and simple to maintain.
Specifications
| Tread Rollers | 1.9″ dia. x 12 ga., model 192S. |
| Chain Drive | Roller-to-roller No. 40 roller chain. Zone-to-zone No. 60 roller chain. |
| Chain Guard | All chains are completely enclosed along the entire length of conveyor. |
| Center Drive | Drive either side mounted or underside mounted (specify). Drive shafts are supported by precision, heavy duty, lubricated, ball bearing units. |
| Roller Centers | 4″ or 6″ RC ONLY. |
| Speed | 35 FPM, constant. |
| Accumulation Zone | 5′-0″ zone lengths, zone singulation operation, photo electric sensor controlled zones with separate drives on each zone. |
| Bed | 6-1/2″ x 1-1/2″ x 10 ga. and 4-1/2″ x 1-1/2″ x 10 ga. formed steel channel frame. Bed sections are bolted together with butt couplings and floor supports. |
| Floor Supports | Optional |
| Bearings | Removable type, heavy duty ball bearings, zinc-plated, grease packed, labyrinth seal. |
| FRL | Unit is provided with filter, regulator and lubricator with 3/8″ ports for 60 PSI operational pressure. |
| Motor Drive | 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor. |
| Capacity | 300 lbs./ft. up to a maximum of 1200 lb. pallet load. |
| Electrical Controls | Optional |
 |
 |