Standard Features
| RM Series | HRM Series | |
| RM Models have manual adjustment of the lateral bending roll via single hand wheel and precision worm drive jack screw boxes. | Lateral Roll is HYDRAULIC actuated from the control console with joystick controlled tilting action for rolling cones. Roll is idle in rotation and has 3 round rod grooves. | |
| Lateral bending roll can be mechanically tilted for cone rolling. | LED Readout to monitor the position of the lateral bending roller. | |
| LED Readout to monitor the position of the lateral bending roller. | Induction Hardened and Polished Surfaces on all 3 rolls. | |
| Hardened & Polished Rolls. | Cone Rolling Device for rolling conical shapes. | |
| Cone device and rod grooves are standard and identical to HRM Series Models. | Pinch Roll Pressure adjustment via ergonomic easy adjust cam lever. | |
| Both Upper and Pinch rolls driven by electric motor and oil bath speed reducer through NiCrMo solid stock gears. | ||
| Lateral Quick Release Top Roll with safety lock. | ||
| 24V Low Voltage Controls, Foot Pedal Rotation, E-Stop, Safety Trip Wires, Instruction Manual. |
Specifications
| Model | Length | Capacity | Roll Ø | Horsepower | Weight |
| RM 1050 x 90 | 3′ | 11 Gauge | 3.54″ | 1.5 | 1,060 |
| RM 1270 x 90 | 4′ | 12 Gauge | 3.54″ | 1.5 | 1,150 |
| RM 1550 x 90 | 5′ | 14 Gauge | 3.54″ | 2.0 | 1,280 |
| RM 2050 x 95 | 6′ | 16 Gauge | 3.74″ | 2.0 | 1,580 |
| HRM 1270 x 90 | 4′ | 12 Gauge | 3.54″ | 1.5 | 1,150 |
| HRM 1550 x 90 | 5′ | 14 Gauge | 3.54″ | 2.0 | 1,280 |
 |
 |