Standard Features
| Both Upper roll and Central Pinch rolls driven by electric motor and oil bath speed reducer through NiCrMo solid stock gears. |
| Base in steel, electro-welded and cast steel shoulder frames, all stress relieved. |
| Lateral roll, idle in rotation with manual up/down adjustment via single hand-wheel. |
| Central pinch roll adjustable manually via single hand-wheel. |
| Front quick release top roll with rotation lock out safety switch. |
| Lateral roll movement via electric motor and heavy-duty worm gear drive for precise positioning and maximum power. |
| Cone rolling device is standard equipment. |
| Lateral bending roll and pinch roll incline for cone working. |
| Low voltage push button controls and foot pedals for rotation control w/ E-Stop. |
| Multi point safety system including circumferential trip wire. |
| Manual forced lubrication. |
| Instruction manual. |
| Wire / rod grooves on pinch roll and lateral bending roll. |
Specifications
| Model | Length | Capacity | Roll Ø | Horsepower | Weight |
| IRM 1050 x 110 | 4′ | 12 Gauge | 4.72″ | 4.0 (3+1) | 2,450 |
| IRM 1050 x 130 | 3′ | 10 Gauge | 5.12″ | 4.0 (3+1) | 2,640 |
| IRM 1270 x 120 | 4′ | 12 Gauge | 4.72″ | 4.0 (3+1) | 2,450 |
| IRM 1270 x 140 | 4′ | 3/16″ | 5.51″ | 4.0 (3+1) | 2,970 |
| IRM 1550 x 110 | 5′ | 14 Gauge | 4.33″ | 3.0 | 2,650 |
| IRM 1550 x 140 | 5′ | 12 Gauge | 5.51″ | 4.0 (3+1) | 3,124 |
| IRM 2050 x 110 | 6′ | 16 Gauge | 4.33″ | 3.0 (2+1) | 3,030 |
| IRM 2050 x 130 | 6′ | 13 Gauge | 5.12″ | 3.0 (2+1) | 3,300 |
| IRM 2050 x 140 | 6′ | 12 Gauge | 5.12″ | 3.0 (2+1) | 3,630 |
| IRM 2550 x 140 | 8′ | 15 Gauge | 5.51″ | 3.0 | 4,070 |
 |
 |