CARELL’S Q-SERIES PLATE ROLLS are now available in fully hydraulic as well as electro-mechanical powered versions to match your shop requirements. QI Hydraulic machines are available with NC/CNC controls. Mechanical Q41 Series are available with programmable positioners.
Standard Features QI & Q41 Series 4 Roll Plate Rolls
| Top & Pinch Rolls both powered in rotation. |
| Bending rolls powered up/down with push button controls. |
| Pinch roll up/down is hydraulic on QI Models, manual or powered on Q41 Models. |
| Drop End Yoke is hydraulic on QI Models, manual or powered on Q41 Models. |
| Top roll raises upward to facilitate finished part removal. |
| Lateral rolls move on direct linear guides, virtually maintenance free, fewer moving parts. |
| All rolls are journaled in multiple tapered roller bearings with forced lubrication. |
| Controls in 24VAC low voltage, push button actuated on mobile operator console. |
| Safety surround trip wire, drop end guard and E-Stop palm buttons are standard. |
| Frames are single weldment design and heavily reinforced to eliminate torque stress. |
| NO CASTING are used on our main-frames and carry a Limited Lifetime Warranty. |
| Superior Brand OEM components are non-proprietary and available worldwide. |
Specifications
| MODEL | SIZE | CAPACITY | ROLL DIAMETER | HP | WEIGHT LBS. |
| Q412-104 | 3′ | 9 GA | 4.33″ | 3.0 | 2,200 |
| Q411-105 | 3′ | 3/16″ | 4.52″ | 4.5 | 2,640 |
| Q413-106 | 3′ | 7/32″ | 5.12″ | 6.0 | 3,300 |
| Q414-107 | 3′ | 1/4″ | 5.91″ | 6.0 | 3,630 |
| Q415-108 | 3′ | 5/16″ | 6.70″ | 8.5 | 4,400 |
| Q412-153 | 5′ | 11 GA | 4.53″ | 3.0 | 2,640 |
| Q411-154 | 5′ | 9 GA | 4.72″ | 4.5 | 2,860 |
| Q413-155 | 5′ | 3/16″ | 5.12″ | 6.0 | 3,740 |
| Q414-156 | 5′ | 7/32″ | 5.91″ | 6.0 | 4,400 |
| Q415-157 | 5′ | 1/4″ | 6.75″ | 8.5 | 4,950 |
| Q412-202 | 6′ | 14 GA | 4.53″ | 3.0 | 2,860 |
| Q413-203 | 6′ | 11 GA | 5.12″ | 6.0 | 4,180 |
| Q414-204 | 6′ | 9 GA | 5.91″ | 6.0 | 4,950 |
| Q415-205 | 6′ | 3/16″ | 6.70″ | 8.5 | 5,720 |
| Q413-252 | 8′ | 14 GA | 5.51″ | 6.0 | 5,280 |
| Q414-253 | 8′ | 10 GA | 6.30″ | 6.0 | 5,500 |
| Q415-254 | 8′ | 9 GA | 7.08″ | 8.5 | 7,040 |
| Q413-301 | 10′ | 20 GA | 5.51″ | 6.0 | 5,720 |
| Q141-302 | 10′ | 15 GA | 6.30″ | 6.0 | 6,490 |
| Q415-303 | 10′ | 12 GA | 7.48″ | 8.5 | 8,690 |
| Capacities are based upon mild steels with 36,000 psi maximum yields. Information is subject to change w/out notice by the manufacturer of Carell Corporation. |
| The owner is responsible to provide point of operation guards as may be required by Federal, State and local requirements that are adequate for your operation. |
Contact us today for a personalized quote to meet your needs!
 |
 |