Specifications
| Shaft diameters | 2″ nominal |
| Roll diameters | 6.90″ nominal |
| Power | 3.5 HP |
| Rolling Speed | 17.5 FPM |
| Weight, approximately | 1,225 lbs. |
| Dimensions, approximately | 45″ x 32″ x 49″ |
| Voltage | 220V 3 Phase 60 Hz |
| (inquire when ordering for other voltage) |
Capacities
| PROFILE SHAPE | MAXIMUM SIZE | MIN. Ø SUGGESTED |
| Flat bar on edge, Hard Way | 3″ x 3/8″ | 34″ |
| Flat bar on edge, Hard Way | 1″ x 5/16″ | 10″ |
| Flat bar on flat, EZ Way | 4-1/2″ x 3/4″ | 32″ |
| Square bar | 1-1/2″ | 36″ |
| Round bar | 1-1/2″ | 32″ |
| Angle leg-out | 2-1/2″ x 1/4″ | 30″ |
| Angle leg-in | 2-1/4″ x 1/4″ | 40″ |
| Square tube | 2-3/8″ x 0.120″ | 60″ |
| Rectangular tube, Hard Way | 3″ x 2″ x 0.109″ | 60″ |
| Round tube | 3″ x 0.095″ | 70″ |
| Round pipe Schedule 40 | 2″ or (2-1/2″ Sch 10) | 24″ (32″) |
| T Sections leg-out-in-lateral | 2-3/8″ x 2-3/8″ x 1/4″ | 28 – 32 – 28″ |
| C Sections legs-out-in | 3″ x 1-1/2″ | 22 – 22″ |
Standard Features
| Rugged, Solid Steel Frames, No Castings! |
| Dual, Large Roller Bearings on all shafts. |
| Hydraulic Top Roll Adjustment (HV/HVP) with push button operation. |
| 3 Driven Rolls – Automatic clutch on top roll with speed compensation. |
| LED Readout (G50-HV), Programmable Readout (G80-HVP) |
| Universal Roll Set, telescopic adjustment, Hardened to 56 HRC. |
| Heavy Duty Multi Axis Lateral Material Guides. |
| Vertical and Horizontal Operation is standard. |
| Mobile Operator Consoles, 24VAC, E-Stop palm buttons. |
 |
 |