Specifications
| Drill Capacity | 5/8″ |
| Horsepower | 1/2 |
| Motor | N/A |
| Spindle Taper | MT2 |
| Working Diameter | 14-1/8″ |
| Number of Speeds | 9 |
| Spindle Speed Range | 240 – 3,400 RPM |
| Electric | CE 110-volt |
| Weight | 175 lbs. |
| Spindle Travel | 3-1/8″ |
| Column Diameter | 3-1/8″ |
| Table Depth | 11-3/4″ |
| Table Width | 11-3/4″ |
| Base Depth | 17-3/4″ |
| Base Width | 12-1/4″ |
| Spindle to Table | 16-1/2″ |
| Spindle to Base | 26-1/2″ |
| Overall Height | 42-1/2″ |
Features
| A locking handle hub with convenient dial-in adjustment and an easy-to-read scale for fast, accurate, and repeatable depth setting changes. |
| Large diameter sturdy spindle for rigid drilling has four bearing points for smooth operation. |
| Bench and floor models both have machined table and base surfaces with t-slots for mounting and fixturing. |
| Top mounted speed selector knob with convenient speed range indicators allows operator to dial in optimal speed range. |
| CE safety electrical package features push button on/off switch, emergency stop button, low voltage controls, thermal overload, and interlock safety switch for belt cover. |
| Massive cast head, machined column, and sturdy cast base reduces vibration. |
| Quick bit changes with standard Morse Taper (MT), common adaptors or standard keyed chuck. |
| Handle has 3 spokes with spring return for precise operator control and ergonomic operation. |
Standard Equipment
| 1/2″ Keyed chuck |
| Drift for bit removal |
| Plexiglas chip and chuck guard |
 |
 |