Specifications
| Capacity | 2,000 lbs. |
| Air pressure | 100 psi |
| Ram travel | 4″ |
| Weight | 195 lbs. |
| Thread | 3/4 – 16 |
| Length of thread | 1-1/8″ |
| Daylight w/o nose piece | 8-11/16″ |
| Daylight w/nose piece | 8″ |
| Nose piece diameter | 1-1/4″ |
| Throat | 5″ |
| Work area | 9″ x 8″ |
| Plate thickness | 1-1/2″ |
| Base | 15-3/4″ x 8″ |
| Hole pattern | 7-1/4″ x 3-1/4″ |
| Overall height | 35″ |
Features
| Non-rotating double acting ram eliminates guide pins on most tooling. |
| Threaded rod end permits nose piece and tooling to be easily attached and detached. |
| Dual-palm push buttons must be engaged before the ram will move and cannot be mechanically by-passed. |
| Air filter/regulator combination assembly ensures clean and continuous air flow to press. |
| Chrome-plated piston rod resists rust and ensures long life. |
| Easily adjusted ram speed, pressure, and stroke allow accurate control of ram movement. |
| Polyurethane rod wiper protects cylinders from dust and contaminants. |
| Daylight can be increased with ease. |
Standard Equipment
| Cast Iron Frame |
| Air Cylinder |
| Double-acting Ram |
| Chrome-plated Piston Rods |
| Air Filter/Regulator Combination |
 |
 |