 |
 |
Specifications
| Metric | Inch | |
| Punching Force | 500 kN | 55 Tons |
| Material Thickness | ||
| Minimum | 1.5 mm | .060″ |
| Maximum | 19 mm | .750″ |
| Maximum Punch Diameter | 127 mm | 5.000″ |
| Punching Capacity A36 (60ksi / 410 MPa Shear Strength) | ||
| .250″ (6 mm) | 127 mm (shear) | 5.000″ (shear) |
| .375″ (10 mm) | 82 mm (shear) | 3.234″ (shear) |
| .500″ (12 mm) | 49 mm (shear) | 1.938″ (shear) |
| .625″ (16 mm) | 31 mm (shear) | 1.234″ (shear) |
| .750″ (19 mm) | 19 mm (flat) | 0.766″ (flat) |
| Punching Hit Rate 10 gage (3 mm) material punched on 1″ (25.4 mm) centers. | 180 HPM | |
| Processing Area | ||
| X-Axis | 3030 mm | 120″ |
| Y-Axis | 1600 mm | 63″ |
| Positioning Speed per Axis | 50 M/min | 2,000 in/min |
| Minimum Programmed Incremental | 0.01 mm | 0.001″ |
| Maximum Material Weight | 450 kg | 1,000 lbs. |
| Maximum Blank Size | 1500 mm x 3050 mm | 60″ x 120″ |
| Requires (2) auxiliary support tables (included). Longer plates must be reviewed by the factory. | ||
| Approximate Shipping Weight | 30,000 kg | 65,000 lbs. |
| Optional accessories will increase overall shipping weight. | ||
| Foundation Requirement | ||
| A 6.00″ / 150 mm thick reinforced concrete is an acceptable foundation for this machine. The 3700SST rest on isolation pads (included.) | ||
| Electrical Requirements | 175A | 460/3/60 |
| Pneumatic Requirements | 1700 L/min @ 6.2 bar | 50 scfm @ 90 psi |
| Water Requirements | ||
| 1/2″ NPT inlet | 1250 L (initial fill) | 330 gallons (initial fill) |
| Approximate Floor Space | ||
| Font – Back | 8,650 mm | 340″ |
| Left – Right | 7,191 mm | 284″ |
| Height (Tool Changer) | 3,302 mm | 130″ |
| Height (Press Frame) | 2,871 mm | 113″ |
| Height (Power Island) | 2,464 mm | 97″ |
NOTE: Specifications are subject to change without notice.
Contact us for a personalized quote!
 |
 |