Manual cold saw with a head that will rotate 45º left and right for mitering. Heavy-duty low production saw, comes with one standard HSS blade. This model has 24V at controls, an e-stop, low voltage protection, and thermal overload protection. Available in 120V, 220V and 440V operation. 440V model requires step-down transformer for operation.*
SPECIFICATIONS: 
| MODEL NUMBER | 315 |
|---|---|
| Voltage | 220V/440V 3 Phase; 120V 1 Phase |
| Horsepower | 1.6 HP – 2.35 HP |
| Cutting Ability | Ferrous/non-ferrous/plastics |
| Maximum blade diameter | 12-1/2″ |
| Maximum vise opening | 4-5/8″ |
| Maximum feed vise opening | n/a |
| Maximum Angle | 45° right/left |
| Slotting | No |
| Phase | 3 Phase/1 Phase |
| Speeds | Three Phase: 22/44 RPM – Single Phase: 44 RPM |
| Weight | 450 lbs. |
| Solid round 90˚ capacity | 2-5/8″ |
| Solid round 45˚ capacity | 2-1/2” |
| Tube 90˚ capacity | 3-5/8″ |
| Tube 45˚ capacity | 3-1/2″ |
| Square 90˚ capacity | 3-1/4” |
| Square 45˚ capacity | 3-1/8” |
| Rectangle 90˚ capacity | 4-1/4” x 2-3/4” |
| Rectangle 45˚ capacity | 3-1/4” x 2-3/4” |
| Work height | 38-1/2” |
| Height | 59” |
| Width | 26” |
| Depth | 36” |
STANDARD EQUIPMENT:
| Blade | Pedestal Base | Tool Kit |
| Gallon Coolant | Adjustable Positive Stop |
FEATURES:
| Head rotates 45° right and left of center for mitering. | Additional ball bearing support of hardened and ground spindle shaft to prevent failure. |
| Dependable oversized spindle and gear assembly with steel spindle and bronze gear. | 24V at controls, E-Stop, low voltage protection, and thermal overload protection. |
| Bronze gear with tapered roller bearing support. | Vise is hand wheel adjustable and cam lever activated for repetitious clamping. |
| Reliable mechanical coolant pump with flow control adjustment. |
MODEL OPTIONS:
| Pneumatic Vice – Factory Installed | 78″ Unlading Table |
| Blade Starter Pack – 3 x 12″ HSS Blades | 78″ Loading Table |
| 440V External Transformer * |
 |
 |