Heavy duty, dual mitering saw that comes with one standard Bi-metal blade. Hydraulic controlled downfeed with automatic shut off at the end of the cut. 2.75HP, 220V motor with up to 60°right mitering capabilities. Dual operating modes with head descent control lock switch. Pre-set the down feed and shut switch so down feed does not need resetting after each cut.
SPECIFICATIONS:
| MODEL NUMBER | SE 10 DM |
|---|---|
| Capacity | 10″ Round |
| Horsepower | 2.75 |
| Voltage | 220V 3 phase |
| Maximum blade speed | 230 FPM |
| Blade width | 1″ |
| Blade length | 108″ |
| Blade speed | 115-230 FPM |
| Solid round 90˚ capacity | 10″ |
| Solid round 45˚ right capacity | 8″ |
| Solid round 60˚ right capacity | 5″ |
| Solid square 90˚ capacity | 7 1/2″ |
| Solid square 45˚ right capacity | 7 1/2 / 6 3/4″ |
| Solid square 60˚ right capacity | 5″ |
| Solid rectangle 90˚ capacity | 10 1/2″ x 7 3/4″ |
| Solid rectangle 45˚ right capacity | 8 1/4″ x 3 1/8″ |
| Solid rectangle 60˚ right capacity | 4 3/4″ x 5 1/4″ |
| Bed work (area) | |
| Worktable height | 37″ |
| Height | 74″ |
| Floor space | 28″ x 66″ |
| Floor space left to right | 28″ x 66″ |
| Floor space front to back | 28″ x 66″ |
STANDARD EQUIPMENT:
| Steel base | Coolant |
| 1 standard bi-metal blade | Stock stop gauge120V Motor |
| Traversing, manual vise |
FEATURES:
| Hydraulic controlled down feed with manual return | CE Certified electronics. Low voltage switches. Thermo over load protection, low voltage protection with low voltage trigger motor start switch and blade interlock |
| Automatic shut off at the end of the cut | Blade tensioning is done via a hand wheel and color-coded gauge tensioning system taking the guess work out of tensioning. |
| Dual operating modes with head descent control lock switch. Pre-set the down feed and shut switch so down feed does not need resetting after each cut | Miters up to 60° right / 45° left. Mitering pre-sets with flip up and pin stops makes set up fast and has precise with miter scale for all angles in between. The head turns-the material doesn’t |
| Powerful, flame tempered, manual clamping vise. Hand wheel adjusted with quick release lever for rapid vise opening and closing action. The vise clamps material firmly | Horizontally mounted guide arms for more rigidity and straightest cuts. Guides are rollers with carbide inserts that are fully adjustable and replaceable |
| Traversing vise can be used left or right of the blade | Electric coolant pump and self-contained coolant system |
| Ergonomic designed for operator’s comfort and control | Steel fabricated base, and stock stop gauge |
| Gearbox is direct bolted to the bow for less vibration, and positive drive gear box is direct driven via steel and bronze gears, no belts and pulleys to content with |
 |
 |