Mitering bandsaw with dual operating modes and hydraulic controlled down feed. 2.5HP, 120V motor with up to 60°right mitering capabilities. Ergonomic design for operator’s comfort and control. Variable speed with rotary adjusting wheel and “Constant speed control” Maintains constant speed to prevent bog downs when cutting.
SPECIFICATIONS:
| MODEL NUMBER | SE 6.5 M |
|---|---|
| Capacity | 6.5″ Round |
| Horsepower | 2.5 |
| Voltage | 120 V |
| Maximum blade speed | Variable |
| Blade width | 3/4″ |
| Blade length | 84 1/4″ |
| Blade speed | 114-262 FPM |
| Solid round 90˚ capacity | 6.5″ |
| Solid round 45˚ right capacity | 4 1/4″ |
| Solid round 60˚ right capacity | 3″ |
| Solid square 90˚ capacity | 6 3/4″ |
| Solid square 45˚ right capacity | 4 1/2″ |
| Solid square 60˚ right capacity | 3″ |
| Solid rectangle 90˚ capacity | 7 3/4 x 3″ |
| Solid rectangle 45˚ right capacity | 6 x 4 1/4″ |
| Solid rectangle 60˚ right capacity | 4 x 2 3/4″ |
| Bed work (area) | |
| Worktable height | 37″ |
| Height | 65″ |
| Floor space | 35 x 48″ |
| Floor space left to right | 35 x 48″ |
| Floor space front to back | 35 x 48″ |
STANDARD EQUIPMENT:
| Steel base | Quick release vice |
| Blade | 120V Motor |
FEATURES:
| Hydraulic controlled down feed with manual return | Blade tensioning is done via “Go No Go” tensioning system with LED taking the guess work out of tensioning. Saw will not run if blade tension is not correct |
| Automatic shut off at the end of the cut | Miters up to 60° right. Mitering pre-sets with slide stops makes set up fast and has precise with miter scale for all angles in between. The head turns-the material doesn’t |
| Dual operating modes, manual cutting or head feed cutting | Horizontally mounted guide arms for more rigidity and straightest cuts. Guides are rollers with carbide inserts that are fully adjustable and replaceable |
| Powerful, manual clamping vise, with quick release lever for rapid vise opening and closing action for fast material size change over. The vise clamps material firmly | Electric coolant pump and self-contained coolant system |
| Ergonomic designed for operator’s comfort and control | 120 volt means you can use it most anywhere |
| Motor gearbox combination bolted to the bow for less vibration | Steel fabricated base, and stock stop gauge, one Bi-metal blade |
| Variable speed with rotary adjusting wheel and “Constand speed control” Maintains constant speed to prevent bog downs when cutting | CE Certified electronics. Low voltage switches. Thermo over load protection, low voltage protection with low voltage trigger motor start switch |
 |
 |