Standard Equipment (All of the following comes with the machine)
| • Squaring Arm with inlaid scale, 39” | • Bolt on table segments…quantity of 3 | |
| • High Carbon, High Chrome Shear Blades | • Hold-downs faced w/anti-mar neoprene | |
| • Ball Transfers on Each Table Segment | • Swing Beam Design | |
| • Manual Quick Change Blade Gap Adj. | • Pressure Sensing Hold Downs | |
| • Squaring Arm, 39” from blade to end | • Electric Stroke Adjustment | |
| • Stroke Counter | • Operator Control Console | |
| • Front-operated Power Back Gauge with DRO | • Shadow Line with LED Lighting | |
| • Blade Guard, Micro Switch Protected | • Low Noise Gear Pump | |
| • Hydraulic, Electrical Overload Protection | • Support Arms Included | |
| • Automatic Swing-up on Back Gauge | • 6CrW2Si blades for cutting mild carbon steel |
Specifications
| Sheet Size | 98″ | ||
| Shearing Capacity | 3/4″ Mild Steel @ 65,000 PSI UTS | 3/8″ Stainless Steel @ 95,000 PSI UTS | (Must consider option for Cr12MoV Blades) |
| Shear Angle | 1 Degree 30′ | ||
| No Load Strokes | 8 | ||
| Throat Depth | 5.9″ | ||
| Adjustment Range of Back Gauge | 0.75″ – 36″ | ||
| Hydraulic Oil Capacity | 118 Gallons | ||
| Main Motor | 40 HP, 220 or 440 Volts | 3 phase, 120/60 amps | |
| (Please specify voltage) | |||
| Net Weight | 35,273 lbs. | ||
| Dimensions L x W x H | 131″ x 90″ x 88″ |
Specifications are subject to change without notice.
Available Options
| • ESA 3-Axis CNC Programmable Back Gauge | |
| Touch-screen operated. Controls back gauge depth, blade gap and stroke length. It has a 200 program storage capacity, each program up to 20 steps, and it can be operated in manual or automatic mode. | |
| • Material drop chute only (*This device makes it easier to retrieve sheared drops and is normally required by customers.) | |
| • Upgrade to Pneumatic Sheet Support AND Material drop chute (Substitute this price for price of Material drop chute.) | |
| • Upgrade to 6-Foot Squaring Arm with inlaid scale | |
| • Upgrade to 8-Foot Squaring Arm with inlaid scale | |
| • Upgrade to 10-Foot Squaring Arm with inlaid scale | |
| • Upgrade Cr12MoV blades for cutting up to 1/8” thick stainless | |
| • Upgrade to 48” Back Gauge; no swing up | |
| • Training in our Memphis, TN Showroom | |
| • Training at customer site, less than 300 miles from Memphis | |
| • Training at customer site, more than 300 miles from Memphis |
 |
 |