Heavy plate drilling, cutting & milling (passthrough)
With a massive drilling head and 20-station automatic toolchanger, the Voortman V325 is a must-have heavy plate drilling, cutting and milling machine. It’s capable of processing thick plate steel up to 100 mm (4”) and drilling holes up to 70 mm (2-3/4”), saving you time compared to milling large diameter holes in heavy plates. Rapidly increase your capacity and level of automation with features like automatic part removal, automatic deburring, 3D plasma bevel and oxy-fuel 4.0 cutting. You can count on the V325 to be the workhorse your production facility needs to grow.
INTEGRATION IN YOUR WORKSHOP
Specifications
| Operating range | feet | 10 x 20 |
| feet | 10 x 30 | |
| feet | 10 x 40 | |
| Thickness | inch | 1/4 – 4 |
| Positioning weight | lbs. | 20,000 |
| Drilling and positioning | Servo motors | |
| Positioning speed X | f/min | 98-1/2 |
| Positioning speed Y | f/min | 88-1/2 |
| Positioning speed Z | f/min | 59 |
| Marking | milling/plasma | |
| Drilling and plasma 3D bevel units | 1 | |
| Maximum torque drill head | lbf*ft | 450 |
| Speed drill head | rpm (stepless) | 0 – 3,500 |
| Tool changer | 2 x 10 | |
| Drill holder | CAT50 | |
| Drill diameter | inch | 13/6994 – 2-3/4 |
| Thread tapping | M6 – M36 | |
| Plasma | up to (amp) | 400 |
| Oxy-fuel | 1 | |
| Machine weight (base) | lbs. | 31,000 |
Main Benefits
| Automatic underside deburring to meet quality standards. |
| Easy torch remounting with 3D collision. |
| Reduced cut-to-cut cycle times. |
| SK50 / CAT50 carbide drilling and heavy milling. |
| Automatic part removal conveyor. |
| 20-station automatic tool changer. |
| Revolutionary oxy-fuel torch. |
| Built-in arc glare protection. |
| Automatic infeed & precise measurement cross-checks. |
| Automatic swarf removal. |
| Dross inhibitor for improved cutting quality. |
| I-cut correction to counteract taper. |
| Xtensive hole performance. |
| Rapid positioning. |
Features and Processes
| Hybrid milling |
| Milling |
| Plasma cutting |
| Plasma 3D bevel cutting |
| Marking by plasma |
| Drilling, tapping, sinking |
| Marking by milling |
| Centerpoint marking |
| Oxy-fuel cutting |
| Accurate X & Y movement |
| Two independent gripper trucks |
| Truevolt technology |
| Advanced nesting software |
| VACAM Machine |
| VACAM in the office |
| Easy operation |
Contact us today for a personalized quote to meet your needs!
 |
 |