Capacities*
| Material Type | Shape | Max. Section Size | Minimum Suggested ID ¹ |
| Flats, Hard |  |
4 x 5/8 in / 100 x 25 mm | 42 in / 1,070 mm |
| Flats, Easy |  |
6 x 1 in / 150 x 35 mm | 30 in / 760 mm |
| Square Bar |  |
2 in / 60 mm | 26 in / 660 mm |
| Angle, Leg-Out |  |
3-1/2 x 3/8 in / 90 x 10 mm | 48 in / 1,220 mm |
| Angle, Leg-In |  |
3 x 3/8 in / 80 x 10 mm | 40 in / 1,020 mm |
| Tee, Leg-Out |  |
3-1/2 x 3/8 in / 90 x 10 mm | 38 in / 965 mm |
| Tee, Leg-In |  |
3-1/2 x 5/15 in / 90 x 9 mm | 38 in / 965 mm |
| C, Legs-Out |  |
6 x 2-1/2 in / 160 x 65 mm | 30 in / 760 mm |
| C, Legs-In |  |
5 x 2-1/2 in / 140 x 65 mm | 40 in / 1,020 mm |
| Round Bar |  |
Ø2-1/2 in / 65 mm | 30 in / 760 mm |
| Pipe, Schedule 40 ² |  |
Ø3 in / 80 mm | 42 in / 1,070 mm |
| Round Tube ² |  |
4-1/2 in / 115 mm x 12 Ga. | ——————– |
| Square Tube ³ |  |
3 x 3/16 in / 80 x 8 mm | ——————– |
| Rectangular Tube ³ |  |
4 x 1-1/2 x 3/16 in / 100 x 40 x 8 mm | ——————– |
| I-Beam, EZ |  |
S6 x 17 in / 160 x 74 mm | 36 in / 915 mm |
| H-Beam, EZ |  |
M4 x 13 in / HEA 100 | 72 in / 1,830 mm |
*with standard equipment
Rev.0 05/2014. (1.) Minimum suggested internal diameter applies to maximum section size as listed at left. (2.) Set of three rolls required for each tube and pipe size. (3.) Special rolls may improve results on these profile. (4.) Special Beam On-Edge Traction Device required. (5.) With standard equipment. This chart indicates minimum suggested inside diameter with maximum profile size, using mild steel rolling generally in multiple passes. Custom tooling for some profiles may be required for volume production and minimum rolling diameters are limited to level of acceptable deformation. The manufacturer and Carell Corporation reserves the right to revise design, construction and specifications without prior notice. Ratings based on material yield on 36KSI. Machines with extended or shortened shafts are available. Series 3000 machines are designed compliant with ANSI B11.12.1996 standards. The employer of the operator is responsible for providing and insuring the usage of point of operation guards and/or properly applied and adjusted point of operation safety devices are required to meet OSHA, state and local safety requirements.
Specifications
| Section Modulus | 1.5 – 2.26 in³ / 28 – 40 cm3 |
| Rolling Speed | 0 – 23 FPM / 0 – 7 MPM |
| Power Output | 10 HP / 7.05 Kw |
| Key Width | 7/8 in / 22 mm |
| Roll Diameters | 10.83 in / 280 mm |
| Shaft Diameters | 3.54 in / 85 mm |
| Approximate Weight | 5,725 lbs. / 2,600 kg |
| Total Shaft Height | ———————— |
| Useable Shaft | 7-1/4 in / 185 mm |
| Thread Length | 3-3/8 in / 85 mm |
| Shaft OD | 3-1/2 in / 90 mm |
| Overall Roll OD | 10-7/8 in / 275 mm |
Standard Features
| Dual LED Digital Displays monitor bending roll positions. |
| Rugged, rigid, one-piece solid steel weldment frame normalized, and precision machined, ample sized access panels and ventilation for internal hydraulic unit. |
| 3 Shafts Driven w/ 3 Direct Coupled Hydraulic Motors and Planetary Speed Reducers for 100% efficient torque delivery. |
| Larger, high strength steel shafts, heat treated and ground, journaled in dual self-aligning spherical roller bearings for optimum performance. |
| Hydraulic power unit integral to the machine frame. |
| Multi axis, 6 way, fully adjustable lateral guides. |
| Variable Speed rotation via electronic proportional valves. |
| Universal bending rolls with modular components, hardened and wear resistant. |
| Operates in both horizontal and vertical orientations. |
 |
 |